AllegroGraph 6.1.5 Performance Tuning

This guide provides some insights on how to use some of AllegroGraph's tunable parameters to maximize database performance. These settings are applied in the AllegroGraph server configuration file (agraph.cfg) as well as the individual database parameter files (parameters.dat). Documentation of all parameter settings appears on the Server Configuration page.

Hardware Selection

For users looking to work with multi-billions of RDF triples we encourage you to purchase as much hardware as your budget will permit. We can offer purchase references ([email protected]) for hardware systems containing multiple CPU cores with 64GB RAM for ~$7,000 or less.

An ideal system for 2-3 billion triples would include 8 CPU cores, 64 GB of RAM, and fast hard drives (15K RPM, arranged in RAID arrays employing striping). This type of system will optimize query performance as well providing rapid ingest speeds. We also work with smaller hardware in our development and release testing and receive very satisfactory results.

Your results will vary based on factors associated with your application, such as the number and size of unique strings found in the triples, etc.

Please contact us if you have any questions related to hardware selection - [email protected]

Disable transparent hugepages (THP)

Transparent hugepages (THP) is a mechanism that allows Linux to automatically use memory pages that are much larger than the standard 4096 bytes. (See, e.g., this description in Red Hat documentation.) THP may be enabled by default in some Linux distributions.

Having THP enabled can result in poor AllegroGraph performance, particularly for large databases. The following command will disable THP on the machine (but the change will not last over reboots so must be executed each time the computer is booted up): 

echo never > /sys/kernel/mm/transparent_hugepage/enabled

That command requires root privileges.

You can usually disable THP entirely by editing a system file. On Red Hat Enterprise Linux 6, for example, edit the file /etc/rc.local, adding the line above (echo never > ...) to it. Other Red Hat releases and other versions of Linux likely have similar means of disabling THP. Check the OS documentation for further information.

If THP is enabled, AllegroGraph logs a warning into agraph.log on startup. The warning is also printed to the console and displayed in AGWebView.

Adjust the Backends Setting

The Backends setting in agraph.cfg determines the maximum number of (non-dedicated) back-ends that the server may spawn. On a machine with many CPU cores, heavy concurrent access can be faster when more back-ends are allowed to be spawned.

As a rule of thumb, set the Backends setting to the number of CPU cores on your machine. agraph.cfg and configuration settings are discussed in the Server Configuration and Control document.

Use Dedicated Sessions

When using non-dedicated back ends, all communications between the client and back ends are funneled through the AllegroGraph service daemon, adding overhead. To maximize client/server communication speed, clients should use dedicated sessions instead.

However, be aware that each dedicated back end uses resources on the server. Dedicated back ends increase performance up to an optimum, after which resource issues begin to degrade performance again.

Catalog Parameters that Improve Performance

You can design catalogs in agraph.cfg to improve disk-access performance. Such a catalog description might resemble this one (the values shown are to illustrate the appearance of the file contents and may not be appropriate for a particular catalog): 

<Catalog fast>  
  ExpectedStoreSize 2000000  
  CheckpointInterval 10m     
  Main /var/lib/ag4/fast  
  TransactionLogDir /mnt/disk2/ag4/fast   
  StringTableDir /mnt/disk3/ag4/fast  
  StringTableSize 128m  
</Catalog>

Catalog parameters and directives are discussed in the Server Configuration and Control document. In the descriptions below, each parameter is linked to its description in that document.

ExpectedStoreSize

Load performance can be improved by using the ExpectedStoreSize catalog parameter. The value should be the maximum number of triples you expect to add to the triple store. During normal operation, AllegroGraph may resize data structures as triples are added to the triple store. Using the ExpectedStoreSize settings allows AllegroGraph to pre-size certain data structures, reducing the number of resizes required, thereby improving overall load performance.

CheckpointInterval

Load performance can be improved by setting the CheckpointInterval catalog parameter. By default, checkpoints occur every 5 minutes. While a checkpoint is operating, commits are blocked. On a large database, checkpoints can take several tens of seconds to complete. Setting the CheckpointInterval to a longer interval reduces how often checkpoints occur, thereby reducing the impact on commits.

Note that increasing the CheckpointInterval may increase the amount of time it takes to recover after an unclean database shutdown.

Note that certain background database operations trigger checkpoints regardless of the CheckpointInterval setting. So, in effect, the CheckpointInterval settings sets an upper bound on the amount of time that may elapsed before a checkpoint occurs.

Unused space in the datafile is not made available for reuse until a checkpoint completes, so increasing the time between checkpoints also increases the potential for datafile growth.

TransactionLogDir

Load performance can be improved by using a TransactionLogDir which specifies a directory on a filesystem which is physically separate from the filesystems on which the other database directories are located. This will separate the writes to the transaction log file, which occur at every commit, from the write activity of the merger processes, which operate in the background.

StringTableDir

By using the StringTableDir directive, it is possible to locate the string table files on a separate filesystem so that accesses to the string tables do not interfere with the write activity of mergers.

StringTableSize

The StringTableSize directive allows specification of the size of the string table, which determines the minimum number of slots to use for the hash table used to map UPIs to their corresponding strings. Increasing the number of slots may result in better insert and lookup performance for triple stores with a lot of unique strings. The increase in performance comes with the following costs:

Minimize non-encoded typed literals

If a triple store contains non-encoded typed literals, then AllegroGraph's SPARQL engine cannot blithely translate numeric range queries such as 

SELECT * {  
  ?s ex:foo ?o .  
  FILTER (?o > 10)  
}

into fast range queries over AllegroGraph's encoded datatypes because typed literals would be missed. However, AllegroGraph's default behavior is to encode numeric and other literals automatically which means that it is almost always appropriate to trust the encoded datatypes when querying. In rare circumstances (e.g., if you have turned off type-mapping), where non-encoded typed numeric (or date/dateTime) literals are in the store, then you may need to tell AllegroGraph to not trust the encoded datatypes in order to achieve correct results when using range filters.

You can force AllegroGraph to make these additional queries by setting the trustEncodedDatatypesForRangeQueries PREFIX option to no.

This can be accomplished either in the AllegroGraph configuration file using 

QueryOption trustEncodedDatatypesForRangeQueries=no

or on a per-query basis using the PREFIX notation as in 

PREFIX franzOption_trustEncodedDatatypesForRangeQueries: <franz:no>

Generally speaking, this setting should never need to be used as it will reduce performance.