| Allegro CL version 8.2 Minimal update since 8.2 release. 8.1 version | ||||||||
This document contains the following sections:
1.0 Preface
An update released in late February, 2006, makes minor changes
and corrections to the update to 7.0 made earlier in the month and to
the SOAP released with 8.0. One documentation correction should be
noted: the default for the :nillable option (to operators like
soap-message-client) is
:ignore (making it compatible with earlier
versions). The earlier documentation update incorrectly said the
default was :accept.
This document describes an implementation of the Allegro CL SOAP API. There are still pieces of the Allegro CL/SOAP implementation to be completed. These will be released when they are ready.
The Implementation Plan for the Allegro/SOAP API is as follows.
The Allegro CL SOAP module requires the SAX parser (:sax) and the AllegroServe (:aserve) modules. These modules are loaded automatically when the SOAP module is loaded.
You load the SOAP API into a running lisp with the following call to require:
(require :soap)
All the symbols in the SOAP API are exported from the
net.xmp.soap package.
There is a SOAP client example in examples/soap/soapex.cl. There is a SOAP server example in examples/soap/soapval1.cl.
The letters xmp stand for XML Message Protocol. The XMP component implements a separately documented API that is used as a basis for the SOAP implementation and for other XML-based message protocols such as XMLRPC.
Users may find it more convenient to try the SOAP examples in a Modern (case-sensitive) Allegro CL image. Since case in SOAP symbols is significant, SOAP symbols typically have mixed case print names. Modern mode handles mixed case names without special effort. If you use an ANSI (case-insensitive) Allegro CL image, SOAP symbols need to be wrapped in vertical bar escapes (as is done in the Simple Example just below) in order to preserve their mixed-case print names.
There is another example in the file [Allegro directory]/examples/soap/bignum-server.cl.
This simple example shows how to access a public SOAP server that returns currency conversion rates. (See also the file examples/soap/soapex.cl.)
This example accesses an external public SOAP server which was available at the time this document was written. This specific example may not produce the described result at other times and places.
The symbols in the "urn:xmethods-CurrencyExchange" namespace are exported from a Lisp package created for this purpose.
(require :soap) (use-package :net.xmp.soap) ;; This form ensures that XSD is a nickname of the NET.XMP.SCHEMA ;; package: (defpackage :net.xmp.schema (:use) (:nicknames :xs :xsd)) (defpackage :conv (:use) (:export "getRate"))
We define a function to send the message and decode the reply:
(defun convert (&optional (country1 "Canada") (country2 "USA"))
(let ((conn (soap-message-client
:lisp-package :keyword
:url "http://services.xmethods.net:80/soap")))
(call-soap-method
conn
'(:element
conv:|getRate|
(:complex (:seq (:element "country1" xsd:|string|)
(:element "country2" xsd:|string|)
)
:action ""
:namespaces
(nil (:conv "tns" "urn:xmethods-CurrencyExchange"))
))
:|country1| country1 :|country2| country2
)))
The main element of the message is defined (in line) as a complex type composed of a sequence of two elements "country1" and "country2". The content of each of these elements is declared to be a string. The information needed to create the element definitions must be obtained from the server documentation, often in the form of a WSDL file.
We try the function (we got the response indicated when this example was run but this is an external service and it may not work as indicated when you try it, either because of a temporary glitch or a permanent problem or change):
cl-user(4): (convert) (conv::getRateResponse (:Result 0.8188)) nil
The result message is returned as a nested list of association lists where element name is the key and element content is the value.
The client API encodes Lisp data into a SOAP message and transmits the encoded HTTP message to the server. The reply from the server is another HTTP message that is decoded into Lisp data returned to the caller. SOAP messages may be exchanges with the HTTP protocol, or with the HTTPS protocol when SSL security is needed. We use the term HTTP protocol in this document to refer to both.
The server API defines Lisp functions that are called when specified messages are sent to the server. The messages arrive as encoded HTTP text and the value returned by the function is sent as an encoded HTTP reply message.
The XML elements in both outgoing and incoming messages must be defined in order to specify the required encoding and decoding behaviors.
An element definition specifies how an element should be encoded in a message to a server and how it can be decoded in a reply message.
An element definition can appear as a component in a Lisp list structure that describes a compound XML element:
element-def -> (:element elt-name-spec type-spec [:nillable t])
The nillable option, when non-nil, adds the "xsd:nillable='true'" attribute
to the element.
An element definition can also be created with a call to define-soap-element:
Arguments: conn elt-name-spec type-spec &rest def-options &key (redef :warn) nillable &allow-other-keys
After a call to define-soap-element, any of the names listed in the elt-name-spec may be used to denote the defined element.
The conn argument may be nil but can also be used to define behavior specific
to a particular class of connections.
The elt-name-spec argument specifies one or more names by which the element can be identified. It is described below.
The type-spec argument may be the name of a
separately defined SOAP type, the name of a built-in SOAP type or an
anonymous type definition as defined in the next section. When
type-spec is nil, the
named definition is removed.
The redef option controls the behavior when a definition already exists. The possible values are:
nil - silently replace the existing definition
:warn - print a warning if a definition exists and
is not equal to the new definition
t - signal an error (instead of a warning)
The nillable option, when non-nil, marks the element as nillable. When an element
is nillable, instances of the element may appear in a document with an
empty content and a property "xsi:nil='true'" - in this case,
treat the element as if it were not there.
When the element definition is output to a WSDL Schema definition, the element is tagged with the attribute "xsd:nillable='true'".
Additional keyword arguments are saved as options in the element definition.
An elt-name-spec is defined as follows:
elt-name-spec -> symbol | string
-> ( { symbol | string | (:any-case string) }... )
When a SOAP message is created, the first (or only) name in
elt-name-spec determines the name included in the
message. The components of an elt-name-spec are:
string --> unqualified QName
symbol --> 1. If the symbol-package of the symbol has been
associated with a namespace
AND
the namespace is included in the current context,
THEN
the qualified QName is included in the message.
2. OTHERWISE the symbol name is included as an unqualified QName.
(:any-case string) --> treated like string above
When a SOAP message is decoded, any one of the names in the
elt-name-spec is accepted as a name for this
element.
string --> accept any string= QName in any namespace symbol --> accept the EQ symbol (:any-case string) --> accept any string-equal QName in any namespace
A type definition specifies the structure, content and attributes of an XML element. A type definition also specifies the encoding from Lisp to XML and the decoding from XML to Lisp.
A type definition can appear as a component in a Lisp list structure that describes a compound XML element:
type-def -> (:simple simple-type-spec simple-option... )
-> (:array type-spec array-option... )
-> (:complex complex-def complex-option... )
A type definition can also be created with a call to define-soap-type:
Arguments: conn name type-def &key (redef :warn) &allow-other-keys
Once defined, a type name may be used in other element or type
definitions. When type-def is nil, the named definition is removed.
Additional keyword arguments are saved as options in the element definition.
simple-type-spec -> nil | type-name
type-spec -> type-name | type-def
complex-def -> (collector complex-part ...)
collector -> :seq ;; zero or one of each part in specified sequence
-> :seq* ;; zero or more of each part in specified sequence
-> :seq+ ;; one or more of each part in specified sequence
-> :seq1 ;; exactly one of each part in specified sequence
-> :set ;; zero or one of each part in any sequence
-> :set*
-> :set+
-> :set1
-> :or ;; exactly one of the parts
The components of :seq :seq* :seq1 and :seq+ must be ordered as specified.
The components of :set :set* :set1 and :set+ may appear in any order.
When a complex element is encoded, the sub-elements are always encoded in the order listed in the definition.
complex-part -> element-spec | complex-def element-spec -> element-name | (:any} | element-def
When a complex-part denotes a sequence of elements the sequence is spliced into the sequence containing the complex-part.
Sub-element definitions enter only through an element-def with a :complex or :array type-def.
:action string - this option is needed on the
top-level element of a message to specify the content of the
SOAPAction HTTP header in the request to the server.
| Option Name | Possible Values | Description |
| :namespaces | The name of a namespace map or a list containing an explicit namespace map. |
This option may be present on any element. The default-urn is encoded
as the "xmlns=" attribute in the element and the other components are
encoded as "xmlns:prefix=" attributes.
Namespace definitions are inherited by nested sub-elements, and obey
the namespace scoping and masking conventions of XML.
Symbols in the specified Lisp packages are encoded as qualified QName strings with the appropriate prefix. |
| :attributes | A property list | This option may be present on any element. When present, this option is encoded as a sequence of attributes "property-name=property-value". |
| :must-understand | nil or non-nil |
This option is
recognized only on the type-def of a top-level element sent as a
Header element in a message. If non-nil then
a "mustUnderstand" attribute with value "1" is included. If nil, then a "mustUnderstand" attribute with value "0"
is included.
|
| :encoding | URLlist |
A string consisting of one or
more URLs separated by spaces. Sent as the
SOAP-ENV:encodingStyle attribute in the element.
|
| :computed-attributes | function-name |
The named
function is called with two arguments (conn
element-name) and is expected to return a property-list of
the form (attr-name value ...) to be added to the
attributes of the element.
When encoding a mesage sent with call-soap-method, the function is called in the dynamic environment of the call to call-soap-method. When encoding a message returned from a server method, there is no dynamic environment relevant to the application. When encoding a message with soap-encode-object, the function is called in the dynamic environment of the call to soap-encode-object. (Use soap-encode-object when computing a method return if dynamic environment is relevant.) |
| :send-type |
nil, t, or a string
or symbol that names a Schema type
|
This option may be present on any element. A non-nil value specifie that the "xsi:type" attribute
should be added to the element instance in the SOAP message.
If the value of the :send-type option is
If the value of the :send-type option is a string or a symbol other
than
If the value of the :send-type option is If the option is not specified, then the behavior is controlled by the value of the :send-type initarg to soap-message-client or soap-message-server. |
| Option Name | Possible Values | Description |
| :length | A single integer or a list of integers | This option specifies the dimensions of an array. A single integer denotes a 1-dimensional array of that length. A list of n integers denotes an n-dimensional array. |
| :send-atype | A type name or a string of the form "type[]" or "type[15,17]". |
Send a
enc:|arrayType| attribute with
type-name as the value.
|
| :send-asize |
nil, a number, some other value, t
|
If non-nil, include an array size in
arrayType. If the value is a number, send that number. If value is another
non-nil value, then the length of the data
determines the actual dimension sent in the message. If this
option is non-nil, then the
:send-atype option must not include any dimension
values, i.e. in a form such as "type[15,17]". A list of integers
should send that list as dimensions but that is NOT IMPLEMENTED.
|
| :array-item |
A list like ([array-item-prop-name array-item-prop-val]
...)
|
This option provides additional detail about how an
array should be encoded. The possibilities for
array-item-prop-name and
array-item-prop-val are:
array-item-prop-name: array-item-prop-val:
:element element-spec
:send-type boolean
:attributes property-list
:argument arg-spec
This option specifies how array
elements are passed to the encoding
functions. The argument is a list
of element data items as follows:
arg-spec: data item:
:element-and-arg (element-spec data)
:type-and-arg (type-spec data)
:attributes-and-arg (property-list data)
:arg-only data
nil data
|
The package qualifier xsd is a nickname for the
net.xml.schema package. You must have evaluated
(defpackage :net.xmp.schema (:use) (:nicknames :xs
:xsd)) in order for the nickname to be valid. Otherwise,
replace xsd with net.xmp.schema
in the lists below.
The package qualifier enc is a nickname for the
net.xml.soap.encoding package. You must have evaluated
(defpackage :net.xmp.soap.encoding (:use) (:nicknames
:enc)) in order for the nickname to be valid. Otherwise,
replace enc with
net.xmp.soap.encoding in the lists below.
The following Schema and SOAP Encoding types have definitions built into the SOAP module.
Schema and
SOAP Encoding Decoded to Encoded from
Type Lisp type Lisp type
enc:|QName|
xsd:|QName| symbol symbol
enc:|decimal|
xsd:|decimal| integer or ratio number
enc:|long|
xsd:|long| integer number in range
enc:|unsignedLong|
xsd:|unsignedLong| integer number in range
enc:|int|
xsd:|int| integer number in range
enc:|unsignedInt|
xsd:|unsignedInt| integer number in range
enc:|integer|
xsd:|integer| integer number
enc:|nonPositiveInteger|
xsd:|nonPositiveInteger| integer number in range
enc:|nonNegativeInteger|
xsd:|nonNegativeInteger| integer number in range
enc:|negativeInteger|
xsd:|negativeInteger| integer number in range
enc:|positiveInteger|
xsd:|positiveInteger| integer number in range
enc:|short|
xsd:|short| integer number in range
enc:|byte|
xsd:|byte| integer number in range
enc:|unsignedShort|
xsd:|unsignedShort| integer number in range
enc:|unsignedByte|
xsd:|unsignedByte| integer number in range
enc:|boolean|
xsd:|boolean| t or nil any
enc:|float|
xsd:|float| double-float number
enc:|double|
xsd:|double| double-float number
enc:|base64|
enc:|base64Binary|
xsd:|base64Binary| string string
All the following types are decoded to a Lisp string and any Lisp value is encoded to a string in the outgoing message:
enc:|string| enc:|duration| enc:|dateTime| enc:|time| enc:|date| enc:|gYearMonth| enc:|gYear| enc:|gMonthDay| enc:|gDay| enc:|gMonth| enc:|anyURI| enc:|NOTATION| enc:|token| enc:|language| enc:|IDREFS| enc:|ENTITIES| enc:|NMTOKEN| enc:|NMTOKENS| enc:|Name| enc:|NCName| enc:|ID| enc:|IDREF| enc:|ENTITY| enc:|normalizedString| xsd:|normalizedString| xsd:|duration| xsd:|dateTime| xsd:|time| xsd:|date| xsd:|gYearMonth| xsd:|gYear| xsd:|gMonthDay| xsd:|gDay| xsd:|gMonth| xsd:|anyURI| xsd:|NOTATION| xsd:|token| xsd:|language| xsd:|Name| xsd:|NMTOKEN| xsd:|NCName| xsd:|NMTOKENS| xsd:|ID| xsd:|IDREF| xsd:|ENTITY| xsd:|IDREFS| xsd:|ENTITIES| xsd:|string|
To make a client call, an application must create a connection instance with a call to soap-message-client.
A SOAP service available via HTTP is located with a URI that has several components:
A SOAP service that requires HTTPS is simply accessed with a URL that starts with "https://".
Within the HTTP request that carries the SOAP message there are HTTP
headers that can be treated as attributes of the HTTP request. The
soapAction header may be used by a specific SOAP
server to recognize or to dispatch a message.
The entire pattern used to identify a SOAP method to be called consists of these components:
Arguments: &rest options
The options (keywords) and their values are (note that a value must be
supplied for :url):
:url url-of-soap-server: this argument is
required since there can be no reasonable default.
:lisp-package package-or-name. This option
specifies the package where unqualified SOAP names are interned as
Lisp symbols. The default is net.xmp.soap.none.
:must-understand flag,
flag can be :strict,
:warn, or nil. The default
is :warn.
:encoding string, sent out as encodingStyle
attribute. URIs separated by spaces, most specific first. The default
is "http://schemas.xmlsoap.org/soap/encoding/".
:actor string, the default is
"http://schemas.xmlsoap.org/soap/actor/next".
:start list, a list of additional arguments
to do-http-request. The following keywords are used by the SOAP module
internals and should not appear in the start
argument: :method, :protocol,
:content-type, :content,
:user-agent, :headers,
:external-format. The most likely user addition in
this argument is :proxy to specify a proxy server.
:null-element value: this argument specifies
the behavior when the content of an element is specified as nil.
value can be
:empty, in which case an empty element is included
in the message; or :default-value (which is the
default if no value is specified), in which case an element with a
default null content is included in the message. For numeric element
types the default value is zero.
Other possible values
are:
:nilled: send an empty element with the attribute
"xsi:nil='true'"
:nilled-or-default: if the element is defined with
the nillable option t
then like :nilled otherwise, send an element with a
default content.
:nilled-or-empty: if the element is defined with
the nillable option t
then like :nilled otherwise, send an empty element.
:nilled-or-none: if the element is defined with
the nillable option t
then like :nilled otherwise, send nothing.
:none: do not include this element in the message.
:empty-element value: this argument
specifies how an empty message element is decoded into a Lisp
value. If value is
:default-value (which is the default if no value is
specified), a suitable Lisp value is returned. For numeric element
types this value is zero and for string types it is the empty
string. If value is nil,
the Lisp value is nil.
:decode-flag flag: the
flag argument may be :strict,
:warn, or nil. When
:strict is specified, all elements in a reply
message must be defined, otherwise an error is signaled. When
:warn is specified, undefined elements are accepted
with a warning message. When nil is
specified, all elements are accepted silently. The default is
:warn.
:message-dns namespace-map: the value of
this option is a namespace map that is combined with the
base-dns namespace map to form the full space map
for each message sent or received through this connection. The
default value is nil. In a typical
application, the standard SOAP and Schema namespaces are specified in
the :base-dns option and any additional namespaces specific to the
application are declared in the :message-dns option.
:base-dns namespace-map: this argument
specifies the namespace map for the standard and required namespaces.
The default value is :soap.
:trim-whitespace t-nil-or-string: this
argument determines the handling of the textual content of a SOAP
message element. The value may be nil,
t (the default), or a string. When nil is specified, then the content is not modified.
When a string is specified, then any leading or trailing characters
mentioned in the string are deleted from the element content. When
t is specified, the characters #\return #\space
#\tab #\newline are deleted from the beginning and end of the element
content.
:body-form value: this argument describes
the SOAP Body element.
The value :one (the default) specifies that the SOAP
Body consists of exactly one element. In this case, the value of
call-soap-method is the representation of
the one and only element in the reply.
The value :many specifies that the SOAP body may
contain any number of elements. In this case, the value of call-soap-method is a list of all the
elements in the SOAP body. This value must be specified if the SOAP
reply message makes use of the multiRef feature.
:nillable value: the value of this option
specifies how element instances with an attribute "xsi:nil='true'"
are handled. The possible values are:
:ignore: (the default, for compatibility with
previous versions of the SOAP module) "xsi:nil" attributes are
ignored. All elements will appear in the message returned to or
passed to the application.
:accept, if an element appears with a
"xsi:nil='true'" attribute and an empty content, then the element is
not included in the message returned to or passed to the application.
:strict: the behavior is controlled by the element
declaration. If the element is declared with a ":nillable t" option,
then, if the element appears with a "xsi:nil='true'" attribute and an
empty content, then the element is not included in the message
returned to or passed to the application.
:send-type t-or-nil-or-other: the value of this
option controls the sending of a "xsi:type" attribute in outgoing SOAP
messages. A value of nil suppresses the
"xsi:type" attribute . A value of t causes
an "xsi:type" attribute to be sent for any element with a named type
definition. The value of the attribute is the name of the element
type.
The value of the option may also be a string or a symbol other than
t; in this case, the value of the option is
the value of the "xsi:type" attribute sent with any element that does
not have an explicit :send-type option specified in the element or
type definition.
The default setting of 500 starts with an initial array of 500 characters, extended as needed using the ACL default vector-push-extend strategy (ie double the array size).
If the message-init argument is specified as a positive integer, it specifies a different inital array size, and the default extension strategy.
If the message-init argument is a list, the first element must be a positive integer that specifies the inital array size. The second element, if present specifies an array extension strategy. A positive integer causes the array to be extended by that amount over what is immediately needed. A real number less than 1.0 causes growth by the specified fraction over the current size. A real number greater than or equal to 1.0 causes growth by the specified ratio.
The following keyword options have defaults which suffice in most normal situations, but different values may be specified in special situations:
:xml-leader string - The default value is
"xml version='1.0'" This value is inserted in the "<?xml >"
declaration at the beginning of the SOAP message.
:xml-encoding value - The default is nil. This argument specifies the encoding used for
the SOAP message. The value may be the name of a Lisp external format,
or a list of the form (lname ename) where
lname is the Lisp name of the external format and
ename is the name that should be shown as the
encoding name in the "<?xml >" declaration.
:http-method value - The default is
:post. The other possible value is
:get. (See the documentation for AllegroServe, in
aserve/aserve.html.)
:http-protocol value - The default is
:http/1.0. The other possible value is
:http/1.1. (See the documentation for
AllegroServe, in aserve/aserve.html.)
:content-type value - The default is
"text/xml". This value is used as the :content-type
argument to do-http-request. (See the documentation for
AllegroServe, in aserve/aserve.html.)
:http-agent value - The default is nil. This value is used as the
:user-agent argument to
do-http-request. (See the documentation for AllegroServe, in
aserve/aserve.html.)
:http-host value - The default is nil. This value is sent as the "Host" HTTP
header. (See the documentation for AllegroServe, in aserve/aserve.html.)
:http-headers value - The default is nil. This argument specifies any additional HTTP
headers to be added to the SOAP message.
Arguments: conn method &rest args
The conn argument is an instance of
soap-client-connector.
The method argument determines the form of the SOAP message, and the remaining arguments (args) supply the data for the content of the message.
The method argument may be a string or symbol that denotes a SOAP element defined with define-soap-element. In this case, the Schema type of the element determines how the remaining arguments are interpreted. The table below shows the possible cases. The top-level element in the message is the element specified in the method argument. The contained sub-elements are built from the remaining arguments.
The method argument may be a list containing an explicit element definition, In this case, again, the type of the element determines how the remaining arguments are interpreted. The table below shows the possible cases. The top-level element in the message is the element specified in the method argument. The contained sub-elements are built from the remaining arguments.
The method argument may also be a symbol that denotes a complex SOAP type defined with define-soap-type, or a list containing an explicit type-def. In this case, the specified type determines how the remaining arguments are interpreted. The table below shows the possible cases. The top-level elements in the SOAP message are the immediate components of the complex type.
Type in method argument |
Suitable Lisp Value |
:complex | name value ... where each name occurs as a top-level element in the complex def. |
:array | A sequence of items, each suitable as an array element. |
:simple |
A single value or a sequence of values. |
The outgoing message includes any headers that have been added to the connector with soap-add-header (described below).
The function returns two values, the contents of the SOAP Body
element, and a list of SOAP Header elements. The form of the body
contents depends on the value of the :body-form
option. If the option is :one, then the value is an
LXML representation of the one and only element in the SOAP Body
element. If the option is :many, then the value is
a list of LXML forms that represent all the elements in the SOAP Body
element.
If the call returns a SOAP Fault, then an error of type
soap-client-fault or
soap-server-fault is signaled.
In this example, we call a method with one argument declared as a simple element containing a string value. We use strings for all the element names because the server does not expect qualified XML names.
(define-soap-element nil "simpleStructReturnTest" '(:complex (:seq (:element "myNumber" (:simple enc:|int|)))))
In the call to call-soap-method, the method argument is "simpleStructReturnTest". The remaining arguments are "myNumber", the name of the one element in the "simpleStructReturnTest" message; and 123, the value or content of the element.
In this example, the SOAP method expects one argument declared as a complex element with 3 sub-elements.
;; This example cannot be simply cut and pasted into a running
;; Lisp because the server for the service is imaginary.
;; Instead, this example is intended to show what
;; a call might look like.
(define-soap-element nil "easyStructTest"
'(:complex
(:seq
(:element
"stooges"
(:complex
(:set
(:element "moe" enc:|int|)
(:element "larry" enc:|int|)
(:element "curly" enc:|int|)))))))
(call-soap-method client "easyStructTest" "stooges" (list "moe" 1 "larry" 2 "curly" 3))
In the call to call-soap-method, the method argument is
"easyStructTest". The remaining arguments are "stooges", the name of
the one element in the "easyStructTest" message; and the list
(list "moe" 1 "larry" 2 "curly" 3), the value or
content of the element. The value in this case is a list because the
"stooges" element has a complex content that consists of several
elements. The list provides the names and values of the sub-elements.
In this example, the SOAP method expects one argument declared as an array of elements. The Lisp argument corresponding to the "myArray" element is a list of strings. Each string in the list is encoded as an array element with the default element name "item".
;; This example cannot be simply cut and pasted into a running ;; Lisp because the server for the service is imaginary. ;; Instead, this example is intended to show what ;; a call might look like. (define-soap-element nil "moderateSizeArrayCheck" '(:complex (:seq (:element "myArray" (:array xsd:|string|))))) (call-soap-method client "myArray" (list "a" "b" "c" "d"))
To specify more precisely the layout of an array we could say
;; This example cannot be simply cut and pasted into a running
;; Lisp because the server for the service is imaginary.
;; Instead, this example is intended to show what
;; a call might look like.
(define-soap-element nil "moderateSizeArrayCheck"
'(:complex (:seq (:element "myArray" (:array xsd:|ur-type|
:array-item
(:element "myArrayElement"
:send-type t
:argument :type-and-arg))))))
In this case each array element in Lisp must be specified as a list
where the first element is the SOAP type of the encoding and the
second is the Lisp value to be encoded. Each array element will be
encoded as an element named "myArrayElement" and the type will be
encoded as a xsd:|type|
attribute. (xsd is a nickname for the
net.xml.schema package. You must have evaluated
(defpackage :net.xml.schema (:use) (:nicknames :xsd
:xs)) for the nickname to be valid. Otherwise replace
xsd with net.xml.schema in the
example below.)
The method argument in this case is "moderateSizeArrayCheck". The remaining arguments are "myArray", the name of the one element in the "moderateSizeArrayCheck" message; and the list ((:xsd:|string| "a") (xsd:|int| 17)), which represents the two array elements. Each element in the list is represented by a list of the type and the value of the element.
If the SOAP message must be composed of several top-level elements, then the method argument would be of the form:
'(:complex (:seq element1 element2 element3))
and the remaining arguments would be
'element1 data-for-element1 'element2 data-for-element2 'element3 data-for-element3
The format of each of the data arguments is determined by the type of the corresponding element.
A SOAP server exports methods that may be called from remote clients through a network interface. The network interface in this implementation is an AllegroServe HTTP server. A method is exported by specifying a SOAP element pattern and a Lisp function. When the specified message is received by the network server, the Lisp function is called. The arguments to the Lisp function are the decoded sub-elements of the message. The result returned by the Lisp function is encoded and sent as the reply message.
A SOAP network interface is established with a call to soap-message-server.
Arguments: &key start enable publish class name service-name url port-name binding-name action lisp-package message-dns base-dns must-understand decode-flag encoding actor trim-whitespace body-form send-type nillable message-init &allow-other-keys
The function returns an instance of
soap-server-connector. This instance is an argument
to most of the other API functions.
The arguments are:
nil,
take no action. If :start, start the default http
server and enable the SOAP server. If :start-new,
start a separate http server and enable the SOAP server. If any other
non-nil value, enable the SOAP server (this
option assumes that the http server was started by some other
means). The default is :start.
:path
"/SOAP" is added. The function and
content-type arguments are not allowed in this
list.
soap-aserve-server-string-in-out-connector.
nil.
See the description of the argument of the same name for
soap-message-client.
:one (the default)
specifies that the SOAP Body consists of exactly one element. The
value :many specifies that the SOAP body may
contain any number of elements. This value must be specified if the
SOAP message makes use of the multiRef feature.
nil suppresses the
"xsi:type" attribute . A value of t causes
an "xsi:type" attribute to be sent for any element with a named type
definition. The value of the attribute is the name of the element
type.
The value of the option may also be a string or a symbol other than
t; in this case, the value of the option is
the value of the "xsi:type" attribute sent with any element that does
not have an explicit :send-type option specified in the element or
type definition.
:nillable value: the value of this option
specifies how element instances with an attribute "xsi:nil='true'"
are handled. The possible values are:
:ignore: (the default, for compatibility with
previous versions of the SOAP module) "xsi:nil" attributes are
ignored. All elements will appear in the message returned to or
passed to the application.
:accept, if an element appears with a
"xsi:nil='true'" attribute and an empty content, then the element is
not included in the message returned to or passed to the application.
:strict: the behavior is controlled by the element
declaration. If the element is declared with a ":nillable t" option,
then, if the element appears with a "xsi:nil='true'" attribute and an
empty content, then the element is not included in the message
returned to or passed to the application.
The default setting of 500 starts with an initial array of 500 characters, extended as needed using the ACL default vector-push-extend strategy (ie double the array size).
If the message-init argument is specified as a positive integer, it specifies a different inital array size, and the default extension strategy.
If the message-init argument is a list, the first element must be a positive integer that specifies the inital array size. The second element, if present specifies an array extension strategy. A positive integer causes the array to be extended by that amount over what is immediately needed. A real number less than 1.0 causes growth by the specified fraction over the current size. A real number greater than or equal to 1.0 causes growth by the specified ratio.
All other arguments are passed as initargs in a call to make-instance. Arguments
recognized for the class
soap-aserve-server-string-in-out-connector include:
nil means that there is no default
action and action must be specified in each call to soap-export-method. A value of
:none means that the SOAPAction header is ignored.
The keyword arguments xml-leader, xml-encoding, http-method, http-protocol, content-type, http-agent, and :http-headers are described under soap-message-client.
If the SOAP server must use the HTTPS protocol with clients, then the
start argument must include the
:ssl and maybe the :ssl-password
options (see aserve/aserve.html).
Arguments: server &key &allow-other-keys
This method enables the server to respond to SOAP method calls. The HTTP server is not affected by this call.
Arguments: server &key &allow-other-keys
This method disables the server for SOAP method calls. The HTTP server is not affected by this call.
Arguments: server &key new start enable &allow-other-keys
Start the HTTP server for this SOAP server. If
new is non-nil, create a
new HTTP server If start argument is specified,
it overrides the start argument in call to
soap-message-server If
enable is non-nil,
enable the soap server.
Arguments: server &key disable &allow-other-keys
Stop the HTTP server for this SOAP server. If
disable is non-nil
disable the SOAP server as well.
A method must be exported to make it available to remote clients through the network server.
Arguments: conn name signature &key lisp-name (enable t) return help action ordered exact &allow-other-keys
This function defines how a Lisp function will be invoked when a SOAP message arrives at the server. The arguments to the Lisp function are the names and content of the sub-elements in the message.
The arguments to soap-export-method are:
soap-server-connector, typically the
result of a call to soap-message-server.
If the value is a list, the first element in the list must be the name of the Lisp function that implements the method, and the remainder of the list must a list of keywords of the same length as the signature.
When the Lisp function is called from the SOAP server, it will receive keyword arguments with keys from the above list. The value of each keyword argument will be the element contents corresponding to the matching element in the signature.
For example, if we export
(soap-export-method conn "myMethod" '("elt1" "elt2" "elt3")
:lisp-name '(my-lisp-method :k1 :k2 :k3)
:return "myMethodResponse")
then the Lisp function must be defined as
(defun my-lisp-method (&key k1 k2 k3) ...)
When this function is called, keyword argument k1 will be present if the element with name "elt1" was present in the SOAP message, and so on. This may seem like the long way around the barn, but this notation allows the Lisp function to be isolated from the variations introduced by namespace-to-package mappings that may be outside the control of the Lisp implementation.
nil,
the method is enabled immediately. When nil,
the method must be enabled before it may be called.
nil).
nil, then ignore SOAPAction header in message.
:none, then ignore SOAPAction header in message.
:default, then use the action specified in
soap-message-server call.
nil,
elements in message must be in same order as in signature
nil, every
element in signature must be present in message
The Lisp function associated with a SOAP message is called with the
soap-invoke-method generic function. The SOAP API includes a method
specialized on soap-server-connector. This method
simply calls apply. Applications can add additional restrictions on
how and when the function is called by implementing a more specific
method on a sub-class of soap-server-connector.
Arguments: server name arg-list &key headers
This function is called to invoke the Lisp function associated with a
SOAP message. The default primary method simply calls apply. User methods can be
defined for sub-classes of soap-server-connector to
enforce more restrictive access rules.
The server argument is a fresh copy of a
soap-server-connector instance. The
name argument is the name of the Lisp function
associated with the SOAP message. The arg-list
argument is a list of arguments for the Lisp function; this is an
alternating list of element names and element content values.
The headers argument is a list of LXML structures that represent the SOAP header elements that were included in the incoming message. The default method ignores these.
This function normally returns one value which is encoded as the content of the reply message. If zero values are returned, then a SOAP client fault with fault string "Call refused" is returned as the reply. Values other than the first are ignored.
An :around method specialized on
soap-server-connector binds the variable *soap-server*. If more specific
:around methods are defined, the body of these
methods will not see this binding.
The Lisp function defined as the SOAP method body is called with an &rest argument that consists of an alternating list of element names and element content values.
If the element names are Lisp keywords, the function may be defined with keyword arguments, otherwise the function must extract argument values by some other means such as getf.
When the incoming SOAP message body consists of multiple elements, only the first element is used to dispatch the method call. A list of body elements is obtained with the function soap-message-body.
If a method needs to return multiple body elements, the method return must be defined by a type-spec or a type-name that defines a sequence type. The value returned by the method must be a list of values suitable for encoding into that type.
Note that the returned value specified in soap-export-method may be an element name or a type name. If a type name is intended, then there must not be an element defined by the same name.
Named element content in message: |
Lisp argument to method: |
| simple type | corresponding Lisp value |
| complex type | an association list in which the keys are sub-element names. The function soap-sub-element-content should be used to extract the content of a sub-element. |
| array type | a Lisp array of t,
each array element is the element content of
the array elements in the message |
During the execution of a SOAP method call, this variable is bound to a copy of the server instance that received the message with the method call.
Arguments: conn
When conn is an instance of
soap-connector, this accessor method returns a list
of all the body elements in the SOAP message.
The following accessor methods return the corresponding components of
the incoming SOAP message. They take an instance of
soap-server-connector as their argument.
Arguments: conn
Accesses the method component of the incoming SOAP message associated
with conn, which must be a
soap-server-connector.
Arguments: conn
Accesses the return component of the incoming SOAP message associated
with conn, which must be a
soap-server-connector.
Arguments: conn
Accesses the signature component of the incoming SOAP message associated
with conn, which must be a
soap-server-connector.
Arguments: conn
Accesses the action component of the incoming SOAP message associated
with conn, which must be a
soap-server-connector.
Arguments: element-item pattern &rest more-patterns
Use of this function is deprecated. Use soap-result-part instead.
This function is used to extract the sub-element content from an argument to a SOAP method. The sub-element-name must be the name of an immediate sub-element of the argument.
If the sub-element is a simple element, the value is a Lisp atom that represents the value of the element. If the sub-element is a complex element, the value is a Lisp association list that can be decomposed with additional calls to soap-sub-element-content.
Arguments: element-alist &optional recursive
Translate an association list into a property list. This is useful when turning an argument into a reply.
Arguments: conn name type-spec data
This function returns an instance of soap-element that contains an
encoded form of the data argument using the
type-spec to control the encoding. If the
name argument is the name of an element
previously defined with define-soap-element, then
type-spec may be nil; in
that case the definition of the element is used.
Once a value is encoded as a soap-element instance, it is not affected by other element or type specifications that may be applied to the value. This function may be used to specify the encoding of SOAP array elements when a uniform encoding rule cannot be specified.
The conn argument may be nil or a soap-connector instance. If nil, we use the value of *soap-server*; thus the first
argument may be nil in the body of a SOAP
server method.
Arguments: &optional v1 v2 v3 error-p
In its simplest form, with no arguments, this function returns a string containing the current version information.
If the first argument is t or a stream, the
version string is written to the stream (t
indicating *terminal-io*).
If the first argument is an integer, the function acts as a predicate that compares the integer arguments to the current version. If v2 or v3 are omitted, they default to zero.
nil the function returns nil; otherwise, the function signals an error.
Arguments: conn result name &rest more-names
When the conn argument is a
soap-connector instance, the primary method
extracts the named components from the result returned by call-soap-method.
The result argument should be the value returned by call-soap-method, an intermediate result returned by soap-result-pair, the list returned by soap-message-body, or a top-level element in the list returned by soap-message-body.
(See the note in the description of soap-result-pair about the eq'ness of suitable arguments to soap-result-pair and the return value of soap-result-pair.)
name may be nil to
specify that the top-level element name in result is ignored. If
not nil, name must be a
string or symbol that is matched to the top-level element name in
result or an integer that simply selects the sub-element by index.
more-names may be a list of nil, string, symbol or integer. Each item in the
list is matched to the next level of nested sub-structure in result.
If the specified sub-element is found, the value returned is the
sub-element content. Otherwise, the returned value is nil.
If multiRef references need to be followed, conn
must be the soap-connector instance which received
the result being examined. The table of reference definitions is saved
in the soap-connector instance when the SOAP
message is decoded.
Arguments: conn result name &rest more-names
Like soap-result-part, but returns a single string if result is a list of strings.
Arguments: conn result error-p name &rest more-names
Like soap-result-part, but behavior is controlled by error-p argument if the component is not found. The values of error-p can be:
:error - signal an error
Arguments: conn result type-spec error-p name &rest more-names
Like soap-result-only, but additional type conversions or tests may be done based on type-spec argument.
Current implementation looks for xsd:string only.
Arguments: conn result name &rest more-names
Like soap-result-part, but returns the cons that begins with the last named sub-element. This result is a suitable argument to soap-get-attributes and soap-get-attribute, or subsequent calls to soap-result-*.
Note that if x is a suitable argument to soap-result-pair,
then (eq x (soap-result-pair conn x nil)) is always
true. Thus to descend into the sub-elements of a result, the
sub-element is passed as the second name in the argument list. The
first name in the list must be nil or the
name of the element represented by the result
argument.
Arguments: conn pair
pair is a SOAP message element as returned by call-soap-method or as extracted with soap-message-body or soap-result-pair.
Value is nil or property list of
(name value ...) where both name and value are
strings.
Arguments: conn pair name &optional default
pair is a SOAP message element as returned by call-soap-method or as extracted with soap-message-body or soap-result-pair.
name may be a string to match any attribute namespace or a symbol for exact match.
Value is nil or value of attribute. If the
attribute is not found, return the default value.
A client connector instance should be used serially only. Only one thread should access the connector for the entire duration of a message round-trip.
When a server responds to an incoming message, a copy of the server
connector instance is cloned for the duration of the message. The
variable *soap-server* is bound in the thread that
calls the Lisp function exported to handle the message. Message
handling programs called by the server must take care to deal with
shared resources with appropriate interlocks.
The complete class hierarchy for sub-classes of
soap-connector includes all the following classes:
soap-connector soap-client-connector soap-server-connector soap-string-out-connector soap-string-in-connector soap-string-in-out-connector soap-client-string-out-connector soap-client-string-in-connector soap-client-string-in-out-connector soap-server-string-out-connector soap-server-string-in-connector soap-server-string-in-out-connector soap-aserve-connector soap-aserve-client-connector soap-aserve-server-connector soap-aserve-string-out-connector soap-aserve-string-in-connector soap-aserve-string-in-out-connector soap-aserve-client-string-out-connector soap-aserve-client-string-in-connector soap-aserve-client-string-in-out-connector soap-aserve-server-string-out-connector soap-aserve-server-string-in-connector soap-aserve-server-string-in-out-connector
Methods in the API and internals methods are specialized on the least-specific method in this hierarchy, but only the classes
soap-aserve-client-string-in-out-connector soap-aserve-server-string-in-out-connector
are actually instantiated in an application using this API. Thus, in order to provide behavior specific to a given application the programmer must create a sub-class of one or both of the above classes.
The following are accessors for soap-connector.
Values are used by encode-wsdl-file.
Arguments: soap-connector
Returns the port name.
Arguments: soap-connector
Returns the binding name.
Arguments: soap-connector
Returns the service name.
Sometimes, when a connection does not seem to be working, it is useful to see the actual XML message strings passed between client and server.
The variable *soap-client-debug* can be set to a
non-nil value to cause a printout of the HTTP
headers and the XML message text sent by the client. When the reply
arrives, the HTTP headers and XML message text are printed as well.
If the variable is set to :stop, then the message
is not sent to the server.
The variable *soap-server-debug* can be set to a
non-nil value to cause a printout of the HTTP
headers and the XML message text received by the server and sent as a
reply.
The debug flag can also be associated with a single client or server connection by using the soap-debug keyword initarg in the call to soap-message-client or soap-message-server.
If the variables *soap-client-debug* or *soap-server-debug* are stack bound, the
stack bound value takes precedence over the slot or the global value.
The formal definitions of these two variables are given below.
When creating a new SOAP server, it may be helpful to exercise the server code with sample data without writing a client program. There are two (internal) functions that may help:
When non-nil, causes the printing out of the HTTP
headers and the XML message text received by the server and sent as a
reply.
When non-nil, causes the printing out of the
HTTP headers and the XML message text sent by the client. When the
reply arrives, the HTTP headers and XML message text are printed as
well.
Character encoding is specified with the
:xml-encoding option to soap-message-client and soap-message-server.
The Content-Type is specified with the
:content-type option to soap-message-client and soap-message-server. The character
encoding specified in the XML header must be consistent with the
Content-Type specified in the HTTP header. Because of the wide range
of possible encoding and conent types, it is impossible to give
specific recoomendations for the settings of these parameters.
If additional HTTP headers are needed, they can be specified in the
:http-headers option to soap-message-client and soap-message-server.
Many web services are defined in an XML dialect known as WSDL. The WSDL definition specifies the element content and data types in the SOAP messages received and sent by the service.
Given a web service WSDL definition, we can generate the Lisp functions and definitions needed to send messages to the service and to receive and decode the replies.
We can also generate the server interface and skeleton definitions for the server methods. The only additional programming needed is to supply the body of the server functions.
This early release of WSDL support implements most of the WSDL 1.1 specification. Any omissions are the result of oversight or for the benefit of an earlier release.
The known omissions include:
<restriction> construct. These types are
translated to (:complex (:seq* (:any))). This
translation will accept most input data, but output messages will most
likely be encoded incorrectly. The affected declarations must be
modified manually.
soap:header and
soap:fault entries in a file.
minOccurs and
maxOccurs attributes
xs:sequence we assume min=0
max=Unbounded
xs:all we assume min=0 max=1
xs:choice we assume min=0
max=1
The packages net.xmp.wsdl and
net.xmp.wsdl.soap hold the symbols in the WSDL
namespaces.
An instance of this class is created when a WSDL file is decoded.
[Earlier releases of this document incorrently described a function of this name. There is no such function.]
Arguments: file &key namespaces base lisp-package class init xml-syntax include import verbose
This function parses a file containing a WSDL specification and
returns a wsdl-file-connector instance containing
the parsed data.
The lisp-package argument is a package specifier. Unqualified WSDL names will be interned in this package.
The namespaces keyword argument may be
nil, :decode, or a
namespace map. The default is :decode.
The base keyword argument may be nil or a namespace map. The default is
:wsdl1-prefix.
If a package-name occurs as an
ex-ns-part, any unknown namespaces in the file
are mapped to this package. Only one package-name
should occur in the extended-namespace-spec.
If the form (:prefix symbol-or-string) occurs as an
ex-ns-part, each unknown namespace is mapped to a different package
named "prefixNN". Only one such form should occur in the
extended-namespace-spec.
The ex-ns-tail component specifies how the standard
namespaces should be identified in the file. If the package-name or
:prefix forms occur as an
ex-ns-part, or if the tail is
:guess, then decode-wsdl-namespaces is called.
When the namespaces keyword argument is
:decode, decode-wsdl-namespaces is called with the
map argument set to base and
if the namespaces can be decoded, the resulting namespace map is
used. Otherwise an error is signaled.
The value of the class argument should be
the name of a sub-class of wsdl-file-connector. The
default is wsdl-file-connector.
The value of the init argument should be a list of initargs added to the call of make-instance of the class.
The value of the xml-syntax keyword
argument can be :strict or nil (or any other value). A value of
:strict forces strict interpretation of Schema
definitions. Any other value relaxes XML Schema syntax to allow many
ill-formed constructs that we have encountered in published Schema
definitions. The default is nil.
The include keyword argument specifies how
XML schema <include> elements should be handled in the WSDL
Schema. A value of nil (the default) causes
<include> elements to be ignored; this behavior may leave many
types and elements undefined. A non-nil
atomic value is assumed to be a function of two arguments: the
wsdl-file-connector instance, and the value of the
"schemaLocation" attribute in the <include> element. If the
non-nil value is of the form (op
. rest), op is assumed to be a function
of 2+n arguments where the first two arguments are as above, and the
remaining arguments are the items in rest. In both cases, the value
returned by the function must be nil or a
string. A nil indicates that the
<include> element should be ignored. A string is assumed to be
the XML content to be parsed as the included Schema.
The import keyword argument specifies how XML schema <import> elements should be handled in the WSDL Schema. The values and handling are like include.
If the value of the verbose keyword
argument is non-nil, progress messages are
printed. The default is nil.
Arguments: string &key namespaces base lisp-package class init xml-syntax
This function is like decode-wsdl-file but the input is from the string argument instead of a file.
Arguments: uri &key namespaces base lisp-package class init xml-syntax
This function is like decode-wsdl-file but the input is from the specified uri argument instead of a file.
Arguments: &key uri string file namespaces base lisp-package class init xml-syntax stream
This is the most general form of decode-wsdl-* functions. Only one of the keyword arguments uri, string, file, and stream should be specified. The specified argument determines the input source.
Those arguments are interpreted in this order:
nil, the
data at the URI is retrieved and treated as the WDSL source string.
nil, it
is treated as the WDSL source string.
nil, the
content of the file is treated as the WDSL source string.
nil, it
is assumed to be positioned at the first character of the WDSL source
string.
If all the source arguments are nil, an error
is signaled.
The other keyword arguments are like decode-wsdl-file
with the following exception: the value of the
namespaces argument cannot be
:decode when the source is a stream. This is
because when namespaces is
:decode, the source is parsed twice, once to find
all the namespace declarations, and again to decode the content. If
the source is a stream, we do not attempt to reposition the stream;
therefore only one pass is allowed.
Arguments: server code string &key factor detail sub-code
This function creates an encoded fault instance.
The server argument must be an instance of a SOAP connector.
The code argument may be a keyword to specify one of the pre-defined SOAP Fault codes in the table below, or it must be a symbol in a namespace package.
:server "SOAP-ENV:Server" :client "SOAP-ENV:Client" :version-mismatch "SOAP-ENV:VersionMismatch" :must-understand "SOAP-ENV:MustUnderstand"
The sub-code if specified it is appended to the fault code and separated with a dot.
The string argument is encoded as the "faultstring" element content.
The factor argument is encoded as the "faultfactor" element content.
The detail argument is encoded as the "detail" element content.
If a SOAP method implementation throws an encoded fault instance, then the SOAP reply message consists of the contained fault message. If a SOAP method implementation throws any other value, it is encoded as a "Client.LispError" fault.
Arguments:
This function resets the SOAP environment by removing all namespace, namespace map, element and type definitions from the Lisp environment and restores the initial definitions included in the SOAP module.
Arguments: file &key namespaces base servers target target-package name (if-exists :supersede) types elements
Create a file with WSDL definitions of the specified servers. The definitions include exported methods and associated data types.
The arguments are:
(:net.xmp.wsdl) that specifies the
WSDL namespace as the default namespace.
The effective namespace map during the encoding af each service is obtained by combining the namespace map of the service with the above default namespace map for the WSDL definition.
(list nil
:wsdl1-namespaces :all).
If this argument is omitted, we use the URI "urn:ThisWebServiceNamespace" as the target, and expect all the top-level message elements to be in no pre-defined namespace.
If this argument is a symbol, it must name a package associated with a namespace in the namespaces argument. If the argument is a string or a URI instance, and it is not mentioned in the namespaces argument, then all top-level message elements are assumed to be in this namespace.
If a top-level message element is encountered in another namespace, an error is signalled (unlesss the target-package argument is specified).
nil, the name of a package, or a package. When this
argument is non-nil, it serves as a filter
for messages to be included in the WSDL output. Only messages in the
specified package are included in the WSDL output.
:supersede
The types and elements arguments may be used to add element and type declarations that are not mentioned in any SOAP messages, or with a null services argument to generate a WSDL output without any service definitions.
Arguments: conn &optional and-ports
Returns a list of the names of all the services defined in the wsdl file. The order of the names is the order of the definitions in the file. If more than one service is defined, the index in the list may be used as the service argument to make-client-interface.
The optional and-ports argument determines the
level of detail included in the returned value. If it is omitted or
nil, the result will look like
(service-name ... ). If it is t, the result will
look like ((service-name port-name ...) ... ). If
it is :verbose, the result will look like ((service-name
(port-name binding url) ...) ... ).
Arguments: conn service destination &key eval (lisp-package :keyword) (file-package :user) empty-element null-element expand-singleton prefix suffix port if-missing-package map compose text-file class-file post-file object-class action message-dns body-form message-method-prefix connect-class built-in-arrays defined-arrays sequence response redef object-access generate-comments
This function generates a source code file with type definitions, element definitions and function definitions derived from the WSDL definition in the conn argument. The client interface is intended to be a fully functional set of functions to access the web service described in the WSDL.
Some web service definitions may change over time, and therefore the interface code may need to be generated repeatedly. The many arguments to make-client-interface attempt to capture all the variations that may be needed to generate usable code so that the generated code will require little if any hand modifications.
The conn argument must be a wsdl-file-connector instance as returned
by decode-wsdl-file.
The service argument can be
nil or omitted, in which case 0 is passed
(see next entry).
:none, in which case service
definitions are ignored, but any types defined in the
<wsdl:types> element are translated to Lisp/SOAP type
definitions.
The destination argument can be
nil, which supresses output
t, which causes output to be sent to the
*standard-output* stream
:lisp-package argument
of the generated call to
soap-message-client.
The default is :keyword.
:empty-element
argument of the generated call to
soap-message-client.
:null-element
argument of the generated
call to
soap-message-client.
Thus, this argument value may be the name of a special variable or a
function call; if that is the case, the behavior of the generated
code may be modified at run time by changing the value of the special
variable or by changing the definition of the called function.
:user.
nil, each generated client function expects as many
keyword arguments as there are immediate components in the SOAP
message.
When the expand-singleton argument is non-nil, and the SOAP message consists of exactly one
sub-element, the generated client function expects as many keyword
arguments as there are immediate components in this singleton
sub-element. SOAP messages are often designed to contain this
structure, and this feature simplifies the client message function
arguments.
:client-.
:index, :message, or
:compose. The keyword :index denotes names like
prefix-17. The keyword :message denotes
names like prefix-SoapMessageName. The keyword
:compose causes the name translation specified in
the compose argument to be applied to the message name suffix. The
default is :index.
:<prefix>namespaces
where <prefix> is the value of the
prefix argument.
:compose, then this option also applies to message
calling function names. This argument can be any of the following
values:
:hyphen, :hyphen-if-ok (the
default), :downcase,
:downcase-if-ok,
:capitalize-accessor, or
:capitalize-all
If the value is :hyphen-if-ok
or :downcase-if-ok, add a hyphen at the case change
location and downcase or simply downcase but no hyphen (respectively)
if no apparent case-fold conflicts results. The value
:hyphen causes a hyphen to be added and downcasing
unconditionally. The value :downcase causes
downcasing (but no hyphen) unconditionally.
:capitalize-accessor capitalizes accessor roots
while :capitalize-all capitalizes all roots. Here are some examples:
:compose=:capitalize-accessor reader-prefix slot="get": The slot "unitPrice" reader will be "getUnitPrice" The decoder for type "itemList" will be "decode-itemList" :compose=:capitalize-all: The slot "unitPrice" reader will be "GetUnitPrice" The decoder for type "itemList" will be "Decode-ItemList"
The argument may also be a list beginning with one of the above keywords. The remainder of the list is a list of exceptions in the following format:
(compose-keyword exception ... )
exception -> string -- a matching input string is kept unchanged
-> (string-in string-out) -- an input string matching
string-in isr eplaced with string-out
Examples:
:compose '(:hyphen "oddCap" ("BADcap" "bad-cap"))
Default translation: "odd-cap" "ba-dcap"
With above exceptions: "oddCap" "bad-cap"
:insert
(the default for class-file and
post-file), or nil. The
value of text-file may also be
:txt, which is also the default for
text-file.
The value nil suppresses the output. The
value :insert inserts the output in the main
destination output file. A stream or pathname value specifies the file
where the output is written.
The text-file argument specifies where a text
comment describing the interface will be written. The value
:txt (the default) specifies a file with the same
name as the main destination output file and a file type of "txt".
The class-file argument specifies where defclass forms and wrapper functions will be written.
The post-file argument specifies where forms generated by a user wsdl-post-process method will be written.
nil, a class name, a class, or an instance. The
specified class must be a sub-class of soap-object-class. When this
option is specified as non-nil, generate code
to map between SOAP structs and instances. See
Section 10.4 Mapping SOAP Structures to CLOS classes for more
details.
:error or
:warn or a string or a symbol.
If the value of if-missing-package is
:error or :warn (the default),
an error or a warning is signaled. When the :warn
option is chosen, if no warnings are printed, the generated interface
is complete and correct. If warnings are printed, the generated
interface file must be hand modified to make it complete and
functional. It is usually easier to adjust the
namespaces argument and generate a new interface
file.
If the value of if-missing-package is a string or some other symbol, then a package with name "net.xmpns.SSSNN" where SSS is the string (or symbol-name) and NN is an index is created and used.
If no Lisp package has been defined for a namespace, the warning "There is no Lisp package defined for namespace ~S" is printed. If a Lisp package is not pre-defined in the application, the symbols will be interned in a new package for each new incoming message.
soapAction header for a generated server.
nil, a set of wrapper generic
functions are generated (see
Section 10.4.4 Call Wrapper Methods).
soap-aserve-client-string-in-out-connector and
soap-aserve-server-string-in-out-connector.
:collapse, then the generated code
replaces the named array type with an explicit array declaration.
Thus:
(define-soap-type nil foo '(:array xsd:string))
;; built-in-arrays=nil
(define-soap-element nil 'bar 'foo)
;; built-in-arrays=:collapse
define-soap-element nil 'bar '(:array xsd:string))
:collapse, then the generated code
replaces the named array type with an explicit array declaration.
:set*, then elements that were defined as
:seq* composites in the WSDL are actually defined
as :set* in the generated code.
:string or
:symbol. The default is :string.
Normally SOAP response elements are defined without namespace
qualifiers since both the name and namespace of the top-level response
element is ignored. When the value :symbol is
specified, then the response element is defined in the same package
and namespace as the SOAP request method name. This feature may avoid
some name conflicts if several WSDL definitions are combined in one
Lisp image.
nil, no action.
A value of :warn causes a warning if a class
definition is generated but a class definition already exists from a
source file different from the destination file.
A value of :skip causes a generated class
definition to be omitted if a class definiton already exists from a
source file different from the destination file.
A value of :skip-and-warn causes a generated class
definition to be omitted if a class definiton already exists from a
source file different from the destination file but a warning is
signalled as well.
This option is useful if multiple WSDL definitions with duplicate elements are combined in one Lisp image. The option is effective only if each WSDL interface is generated and loaded before the next WSDL is analyzed.
nil (the default), accessors are
generated in the output file package. If the value is
:object-class, then accessors are generated in the
package of the object class; this is the package associated with the
namespace of the SOAP Schema type.
When this argument value is :object-class, then
encoder names are generated without a prefix.
nil, the generated code file contains
comments that show where wsdl-generate-code is called during code
generation. The comments show the arguments to wsdl-generate-code
in each situation. This output may help in designing application
specific methods for wsdl-generate-code.
In order to define the generated interface, the generated interface file must be compiled and loaded.
To review, these arguments control the generated code:
:index or
:message
:one or
:many
nil
or name of class (subclass of soap-object)
:hyphen,
:hyphen-if-ok, :downcase,
:downcase-if-ok, or nil
nil or name of class (subclass of
soap-connector)
nil or :collapse
nil or :collapse
nil
or :default-value or :empty
nil or :default-value
nil or
:set*
When generating Lisp code from a WSDL definition, there may be name conflicts or possible name conflicts when several different spellings are mapped to the same Lisp symbol. These conflicts are signaled as warnings of the form:
Possible name conflicts: (key (symbol from...)...)
where each from component is a string or a list of strings used to derive the name of the symbol.
Arguments: conn service destination &key eval (lisp-package :keyword) (file-package :user) empty-element null-element expand-singleton prefix suffix action message-dns port if-missing-package map response redef object-access generate-comments
This method analyzes the data in the WSDL file to generate type definitions and server function skeletons.
Most of the arguments are as for make-client-interface. The eval argument, as in make-client-interface, is ignored.
The prefix argument is the leading
component of the generated names of server functions. The argument
must be a string or a symbol. The default is
:server-.
The action argument is the default
soapAction expected for all incoming messages.
The message-dns argument is used to initialize the namespace definitions of the server instance.
In order to define the generated interface, the generated interface file must be compiled and loaded.
Arguments: conn file-name
This function may be used as the value of the
import or include keyword
arguments to decode-wsdl-file. The returned value is
nil or the contents of the specified file.
Arguments: conn url-string
This function may be used as the value of the
import or include keyword
arguments to decode-wsdl-file. The returned value is
nil or the contents of the specified url.
The meaning of XML, SOAP, and WSDL texts depends in part on the correct identification of various namespaces.
XML namespaces are identified by a URI and URIs are considered distinct if they differ in any character position. The SOAP module considers two URIs equivalent if they only differ in a final slash character.
"https://www.w3.org/2001/XMLSchema"
"https://www.w3.org/2000/10/XMLSchema"
"https://www.w3.org/1999/XMLSchema"
:net.xmp.soap.encoding.
:net.xmp.wsdl.
:net.xmp.wsdl.soap.
A namespace declaration is a list of the form (package
prefix uri).
One package may be linked to several URIs. One URI may be linked to several packages. The most recent definition is the first to be seen in a search. The primary-p argument to various operators allows some reordering.
One advantage of making a global namespace definition is that the package name may be used to denote the mapping. Also the entry will be found if :all is in namespace map.
Here is a recursive specification of the namespace maps:
namespace-map -> symbol-name-of-namespace-map |
(default-namespace [namespace-entry]... [namespace-tail])
default-namespace -> nil ;; no default specified,
;; inherit the current default or continue
;; the search for a default specification
-> "" ;; the default is to have no default at all
;; blocks any inherited default
;; and stops the search for a default
-> symbol ;; package name of defined namespace
-> string ;; search in order
;; 1. package name of defined namespace
;; 2. uri
-> uri instance ;; uri
namespace-entry -> (package-name) | (package-name prefix) |
namespace-declaration | namespace-declaration-instance
symbol-name-of-namespace-map |
:all
:stop
namespace-tail -> nil | (package nil :any) | (string nil :prefix)
The Lisp class of a namespace map object.
Arguments: name &rest namespace-map-parts
This function returns a xmp-namespace-map instance.
The name argument may be nil, to define an anonymous namespace map. The
namespace-map-parts argument may be nil to define an empty namespace map. If the list is
not nil, it must begin with a default
namespace specification. The general format of the list is
default-namespace [namespace-entry]... [namespace-tail]
Where the default-namespace component may be
nil to denote no default.
The namespace-entry and
namespace-tail components are described in
Section 10.3.2 Namespace Definition Operators.
:wsdl-namespaces -> ( :wsdl1.2 :wsdl1.1 :soap )
This definition recognizes both the WSDL 1.1
and the WSDL 1.2 namespaces, and uses the WSDL 1.2
namespaces for output, since they appear first.
:wsdl1-namespaces -> ( :wsdl1.1 :wsdl1.2 :soap1 )
This definition uses the WSDL 1.1
namespaces for output, since it appears first.
:soap -> ( :soap1.2 :soap1.1 :schema )
:soap1 -> ( :soap1.1 :soap1.2 :schema )
:soap1.1
:soap1.2
:wsdl1.1
:wsdl1.2
:schema -> ( :schema2001 :schema1999 )
:schema1 -> ( :schema1999 :schema2001 )
:schema1999 :schema2001
:wsdl-combine -> ( :wsdl-namespaces :all (:wsdl-data nil :any) )
This definition searches the :wsdl-namespaces first,
then any globally declared namespaces.
This definition maps any unmatched namespaces to the
:wsdl-data package.
:wsdl-keyword -> ( :wsdl-namespaces :all (:keyword nil :any) )
This definition maps any unmatched namespaces to the
keyword package.
:wsdl-prefix -> ( :wsdl-namespaces :all ("wsdl-" nil :prefix) )
This definition maps each unmatched namespace to a new
package with a name of the form "wsdl-nnn"
:wsdl1-combine -> ( :wsdl1-namespaces :all (:wsdl-data nil :any) )
:wsdl1-keyword -> ( :wsdl1-namespaces :all (:keyword nil :any) )
:wsdl1-prefix -> ( :wsdl1-namespaces :all ("wsdl-" nil :prefix) )
The current namespace environment is defined as the current nesting of namespace declarations. It consists of nested :namespaces options and/or xmlns attributes, the :message-dns slot specification, the :base-dns slot specification, and finally the namespace-tail entry.
During input decoding, when the server is decoding a request or a client is decoding a reply, or when decoding a wsdl file, "xmlns" attributes cause a search of the current namespace environment for an exact match on the URI. If a match cannot be found, an error is signalled. If a match is found, the XML name is interned in the corresponding Lisp package.
During output encoding, when the server is encoding a reply, or a client is encoding a request, or when encoding a wsdl file, create a top-level xmlns attribute from the first occurrence of each explicit namespace declaration in the namespace environment. A symbol in a package present in the current namespace environment is encoded as a qualified name.
The Lisp class of a namespace declaration object.
Arguments: package prefix uri &optional primary-p
This function stores a namespace definition that will be used in decoding or encoding SOAP messages. These definitions are created by explicit calls to this function or by mentions of namespaces in calls to define-namespace-map.
If the package and uri
arguments are specified (that is, given a non-nil value), then a new namespace declaration object
is created if it does not already exist.
If only the package or the
uri argument is specified (that is, given a
non-nil value), then find a matching
namespace declaration object, if one exists.
If both package and uri are
nil, then do nothing and return nil.
This function returns a xmp-namespace-declaration instance or
nil.
The prefix argument is ignored when decoding SOAP
messages. When encoding SOAP messages, only namespace definitions
that have a non-nil prefix are used,
definitions with a nil prefix are ignored and
symbols in that package are encoded as unqualified names. The defined
prefix is used in the xmlns declaration of the namespace. The
prefixes mentioned in a specific XML context must be distinct or an
error is signaled.
Arguments: package prefix uri
This function deletes any namespace declarations matching the
arguments. Either package or
uri must be non-nil, or
no namespaces are deleted. If one is nil while the other is
non-nil, then all namespaces with the
non-nil component are deleted, that is, nil
works as a wildcard when the other component is specified. Nothing
will be deleted if only prefix is non-nil.
In an earlier version, the following variables had namespace specifications as values. All these variables are removed and namespaces are determined by the namespace operators described above.
*soap-namespaces*
*wsdl-default-namespaces*
*application-namespaces*
*soap-namespaces-a*
*soap-namespaces-b*
*wsdl-1.1-namespaces*
*wsdl-1.2-namespaces*
The function decode-wsdl-namespaces returns information about the namespaces mentioned in a WSDL definition and it can generate a namespace specification based on some heuristic rules.
Arguments: &key file string uri map show
This function returns 4 values:
file should be a string containing the path to a file. string should be a string containing a WSDL definition. uri should be the uri where a WSDL definition may be found. Only one of the above arguments should appear.
The map argument specifies a namespace map
that determines the namespace mapping strategy. The default is
:wsdl1-prefix defined as (nil
:wsdl1.1-namespaces :all ("wsdl-" nil :prefix)). This
definition searches in this order:
:wsdl1.1, :wsdl1.2,
:soap1.1, :soap1.2,
:schema2001, :schema1999
If the value of the show keyword argument is
non-nil, it must be t or a stream. Then a readable version of the
namespaces is printed to *standard-output* (when t) or to the stream.
When decode-wsdl-file is called with a
namespaces argument of
:decode, the function decode-wsdl-namespaces is called and if
values 2 3 and 4 are nil the decode operation
proceeds with the resulting namespace specification. If any of the
values 2 3 or 4 are non-nil, the function
signals an error.
When the :object-class argument is specified to make-client-interface, a set of classes are generated from the type and element definitions in the WSDL file. Constructor and accessor functions are also generated, as well as object-oriented methods for calling SOAP methods.
Application may define a subclass with different slot values for class slots:
:soap-get-
:soap-set-
Each complex type definition in the WSDL is mapped to a sub-class of
the user-defined sub-class of soap-object-class. The Lisp
name of the Schema type is also the name of the corresponding CLOS
class.
The slot readers in the generated classes have names of the form
<reader-prefix from object-class><converted SOAP sub-element name>
The slot writers in the generated classes have names of the form
<writer-prefix from object-class><converted SOAP sub-element name>
The arguments to the slot writer are the standard CLOS writer arguments: new slot value, and instance.
new-<converted SOAP type name> is an ordinary function with keyword arguments. The keyword argument names are the converted sub-element names of the complex type.
decode-<converted SOAP type name> is an ordinary function of one argument, the value returned by call-soap-method.
<prefix>encode is a generic function of one argument
specialized on the soap-object-class of the SOAP complex
type.
These wrapper functions are generated when the
:message-method-prefix option is non-nil.
<message-method-prefix><converted SOAP message name>
The method takes positional arguments specialized on the SOAP structure classes defined for the corresponding message components.
The conversion of SOAP Schema names to Lisp symbols is controlled by
the :convert argument to make-client-interface. Its value can be:
nil: the case-sensitive SOAP name is used as
the Lisp symbol name
:hyphen: The SOAP name is hyphenated at case shift
positions and downcased
:hyphen-if-ok: if there are no apparent case
folding conflicts, the SOAP names are hyphenated and downcased as
above; otherwise, the case-sensitive SOAP name is used as the Lisp
symbol name
:downcase: the SOAP name is simply downcased.
:downcase-if-ok: if there are no apparent case
folding conflicts, the SOAP names are simply downcased; otherwise, the
case-sensitive SOAP name is used as the Lisp symbol name
In this section, we go through the steps needed to generate a client interface from a WSDL definition obtained from some outside source. We use the files AmazonS3.wsdl and AmazonS3.xsd as examples. The files were obtained from the web but copies are included in the Allegro CL distribution in examples/soap/ (included in an update released in early September, 2006).
(The following steps could be applied to the web version but the results may differ if the service definition has changed.)
In order to run the example, be sure that the SOAP module is laoded and that the :net.xmp.soap is used (otherwise package-qualify the symbols as necessary in the example code).
(require :soap) (use-package :net.xmp.soap)
(soap-new-environment) (decode-wsdl-namespaces :file "AmazonS3.wsdl" :map nil :show t)
The first expression is optional. It may be a good idea to evaluate this expression if this example is repeated in the same Lisp invocation or if other WSDL files have been tried. The effect is to discard all SOAP definitions and start with a clean environment.
The second expressions parses the WSDL file and reports on the namespaces mentioned in the file. The show argument prints a readable summary of this information:
#|
Namespace map:
(nil
("net.xmp.wsdl" "wsdl" "http://schemas.xmlsoap.org/wsdl/")
("net.xmp.wsdl.soap" "wsdl-soap"
"http://schemas.xmlsoap.org/wsdl/soap/")
("net.xmp.schema" "xsd" "https://www.w3.org/2001/XMLSchema"))
Other namespaces:
"http://s3.amazonaws.com/doc/2006-03-01/")
|#
The first section of the output labelled "Namespace map:" lists the namespaces that were recognized and are already mapped to Lisp packages because of built-in definitions or previous user definitions.
The next section labelled "Other namespaces:" lists the URLs of other namespaces mentioned in the WSDL. These will be mapped to generated packages by default, but it is good practice to define a fixed package for each namespace. This makes generated code more readable and gives consistent and comparable results from one run to the next.
Sometimes additional sections are listed to show ambiguous or unrecognizable namespaces. These situations may indicate an ill-formed WSDL. In most cases, if these sections appear customer service may need to intervene.
In this example, there is one namespace specific to this application.
(define-namespace :aws "aws" "http://s3.amazonaws.com/doc/2006-03-01/") (define-namespace-map :awsmap nil '(:aws))
The first expression defines one namespace. The second expression defines a namespace map which is used to hold all the namespaces in the configuration of an application.
(setf def
(decode-wsdl-file "AmazonS3.wsdl" :namespaces :awsmap :verbose t))
The above expression decodes the WSDL file and returns a wsdl-file-connector instance. We assign this to a variable since it will be needed in subsequent expressions.
; schemaLocation=AmazonS3.xsd was not included.
The above message indicates that something was not quite right during the decoding, but we forge ahead hoping for the best.
(make-client-interface def 0 t)
This expression generates a client definition for the first (zeroth)
service definition in the previously decoded file. The generated code
is directed to *standard-output*.
Error: Cannot determine message type in (...) - type may be defined in included Schema.
But we cannot generate code because there is some missing information.
The included file appears to be necessary in order to decode and analyze the WSDL definition fully. We need to tell the decoder how to find the included text.
(setf def (decode-wsdl-file "AmazonS3.wsdl" :namespaces :awsmap
:verbose t :include 'wsdl-include-file))
The above expression specifies the function wsdl-include-file to map the schemaLocation attribute to a file in the local file system.
; schemaLocation=AmazonS3.xsd included with wsdl-include-file
This time the message confirms that a second Schema was included.
(make-client-interface def 0 "a-client.cl")
This time, we direct the output of the generated code to a file. The returned value is a summary of the generated definitions.
((("Output in file:" :key :file) "a-client.cl")
(("Defined functions:" :key defun)
(client-18 "Send client message ListAllMyBuckets "
aws:ListAllMyBuckets)
(client-17 "Send client message ListBucket " aws:ListBucket)
(client-25 "Send client message DeleteObject " aws:DeleteObject)
(client-14 "Send client message PutObjectInline "
aws:PutObjectInline)
(client-1 "Send client message PutObject " aws:PutObject)
(client-12 "Send client message GetObjectExtended "
aws:GetObjectExtended)
(client-5 "Send client message GetObject " aws:GetObject)
(client-9 "Send client message SetBucketAccessControlPolicy "
aws:SetBucketAccessControlPolicy)
(client-8 "Send client message SetObjectAccessControlPolicy "
aws:SetObjectAccessControlPolicy)
...)
(("Defined SOAP elements:" :key define-soap-element)
aws:ListAllMyBucketsResponse aws:ListAllMyBuckets
aws:ListBucketResponse aws:ListBucket aws:DeleteObjectResponse
aws:DeleteObject aws:PutObjectInlineResponse aws:PutObjectInline
aws:PutObjectResponse ...)
(("Defined SOAP types:" :key define-soap-type)
aws:ListAllMyBucketsList aws:ListAllMyBucketsResult
aws:ListAllMyBucketsEntry aws:ListBucketResult aws:ListEntry
aws:PutObjectResult aws:GetObjectResult aws:AccessControlPolicy
aws:AccessControlList ...)
(("Defined packages:" :key defpackage) :keyword :common-lisp-user :aws
#:aws #:common-lisp-user)
(("Lisp package of generated file:" :key in-package)
#:common-lisp-user)
(("Other entries:" :key define-namespace-map) :client-namespaces)
(("Other entries:" :key defvar) *client-service-url*))
In order to try the interface, we need to compile and load the generated code.
(load (compile-file "a-client.cl")) (setf *soap-client-debug* :stop) (client-7 :Bucket "bbb" :AWSAccessKeyId "id" :Timestamp 123)
The first expression compiles and loads the generated code. It is not necessary to compile, but the compiler does identify many problems in code before it is run.
The second expression informs the SOAP runtime to stop before actually sending a message to the server, and print a formatted version of the SOAP message for review.
At this point, the generated code may be tweaked in various ways by generating the code again with additional parameters to make-client-interface:
When several WSDL definitions must be combined into one Lisp image, there may be several issues that must be resolved before a working application is generated:
The distinct WSDL definitions may use identical names to denote distinct types or methods. This situation may be corrected by decoding the files into distinct Lisp packages and mapping namespaces appropriately. The prefix and suffix options may also be useful in keeping names distinct.
The distinct WSDL definitions may duplicate Schema elements by explicit repetition or by including identical definitions. The :redef argument to make-client-interface provides several strategies for handling this situation.
Arguments: conn mode info op &rest args
This method may be used to modify the code generated by make-client-interface and make-server-interface.
The default method specialized on (wsdl-file-connector t t
t) simply emits the cons of op and
args.
If the op argument is null and there is only exactly one element in args, then the entire form is that single element.
The method may return two values when it is called for a top-level form. In that case the second value may be a string or a list of strings. The strings are emitted as comments before the form.
An application may define a sub-class of wsdl-file-connector and some more
specific methods to alter the generated code. The application class
is specified in the call to decode-wsdl-file.
The method is called with the following arguments during code generation:
| mode | info | operator | comments |
:client |
:top-level |
defun | client message function |
:client |
nil |
soap-message-client | |
:server |
:top-level |
defun | new server function |
:server |
:top-body |
defun | method definition skeleton |
:server |
nil |
soap-message-server | |
:object-class |
:top-level |
defclass | |
:object-new |
:top-level |
defun | |
:object-decoder |
:top-level |
defmethod | |
:object-encoder |
:top-level |
defmethod | |
:object-type |
:top-level |
defclass | |
:object-wrapper |
:top-level |
defmethod | |
:sever |
:method-body |
--- | called to emit default comment "INSERT BODY HERE" |
Arguments: conn defs
This function is called after all the types, elements, and message functions have been generated, but not yet written to the output file. The built-in method is specialized on (t t) and does nothing.
The defs argument is a list of items of the form
(form comment ...). The order of the items in the
list is the order in which the forms will be written into the output
file.
An application may add a primary or an :around
method to manipulate the definitions or to add additional code to the
output file.
To add a form to the output, call the function: wsdl-add-form with
arguments conn form &rest comments.
Arguments: conn
The value returned by this function is one of the following:
nil: no conflicts detected
(x y z...): a list of symbols or strings that
identify symbols that may cause problems during case-folding.
Arguments: conn form &rest comments
The form is added at the end of the code generated by make-client-interface or make-server-interface. If comments are specified, they must be strings. Comments are inserted before the form in the generated file.
Code can only be added at the end of the generated file. If it is necessary to modify code at the beginning of the file, it must be done by adding a wsdl-generate-code method that modifies one of the forms emitted at the beginning of the file.
If a client message must be sent with one or more SOAP header elements, the elements must be built with make-soap-header and saved in the connection instance created with soap-message-client. Every time a SOAP message is sent, the current collection of headers is included in the message as a single SOAP Header element.
If a SOAP server method must examine the content of SOAP header elements when handling a SOAP message, the accessor soap-message-headers may be used to extract the list of header elements.
Arguments: conn element-spec &rest args
The arguments are as for call-soap-method, but instead of sending
a message, this method returns an object of class
soap-header which contains an encoded
representation of the header element.
If the header element must have a "mustUnderstand" attribute, the attribute may be specified as a :must-understand option or included in the :attributes option of the element definition.
Arguments: conn header &key after before reset
The header argument must be an instance of the
class soap-header. The method adds the header to
the list of headers that will be sent with the next message.
The before and after
arguments may be nil or headers previously
added.
If reset is non-nil,
then any previously added headers are discarded.
Arguments: conn element-name
When a reply message is decoded, and a "mustUnderstand" attribute with value "1" is present, then this method is called.
The default method behavior depends on the setting of the
:must-understand flag in the connection
instance. The following settings produce the indicated behavior:
:warn - print a warning and accept the header
nil - accept the header silently
Arguments: conn
When conn is an instance of soap-connector, this accessor method returns a list of all the header elements in the SOAP message.
All the warnings and errors signalled by the SOAP module are described by the following hierarchy:
xmp-warning hierarchy:
simple-warning
xmp-warning
xmp-syntax
xmp-redefinition
soap-decode-warning
xmp-condition hierarchy:
error
xmp-condition
xmp-client-condition
soap-client-error
soap-client-fault
xmp-server-condition
soap-server-error
soap-server-fault
soap-mismatch
soap-must-understand
*application-namespaces* (Removed variable, see this note)
*soap-client-debug* (Variable)
soap-object-class (Class)
*soap-namespaces* (Removed variable, see this note)
*soap-namespaces-a* (Removed variable, see this note)
*soap-namespaces-b* (Removed variable, see this note)
*soap-server* (Variable)
*soap-server-debug* (Variable)
*wsdl-default-namespaces* (Removed variable, see this note)
wsdl-file-connector
*wsdl-1.1-namespaces* (Removed variable, see this note)
*wsdl-1.2-namespaces* (Removed variable, see this note)
xmp-namespace-declaration
xmp-namespace-map
Copyright (c) 1998-2016, Franz Inc. Oakland, CA., USA. All rights reserved.
This page was not revised from the 8.1 page.
Created 2010.1.21.
| Allegro CL version 8.2 Minimal update since 8.2 release. 8.1 version | ||||||||