ToCDocOverviewCGDocRelNotesFAQIndexPermutedIndex
Allegro CL version 8.2
Moderately revised from 8.1.
8.1 version

Allegro CL 8.2 Documentation Introduction and Overview

This document contains the following sections:

1.0 Documentation introduction
   1.1 Common Graphics and Integrated Development Environment Documentation
   1.2 ANSI Common Lisp and MetaObject Protocol Documentation
   1.3 Some notation
2.0 The Overview section
   2.1 Allegro CL documentation table of contents
   2.2 Allegro CL documentation: list of overview HTML documents
3.0 The Reference section
4.0 Assistance available on the internet and the World Wide Web
   4.1 The Allegro CL FAQ
   4.2 Patches
   4.3 Further patch information
   4.4 Should you get all patches?
   4.5 What to do with patches when you have downloaded them
   4.6 Updating the bundle file
5.0 Reporting bugs
   5.1 Where to report bugs and send questions
   5.2 Core files: when they are useful and what to do with them
6.0 Contacting Franz Inc. for sales, licensing assistance, and information

Documentation revision

The 8.2 documentation indicates, on each page, whether the page was revised compared to the previon version of the Allegro CL Updated Documentation. The extent of the revision is indicated in the upper right corner where it says Allegro CL version 8.2, also says one of:

Allegro CL documentation is regularly updated between releases. This page on the Franz Inc. website (http://franz.com/) has links to the latest version of the Allegro CL documentation and says whether there has been an update, and, if so, when. Links on that page direct you to instructions for downloading the revised documentation if an update is available.

Link to 8.1 documentation

There is a link to the 8.1 version of essays and pages which also existed in version 8.1 (that is, are not new in version 8.2). The link is on the right of the navigation bar and says 8.1 version. the link goes to the Franz Inc. website copy of the 8.1 documentation. Note that we do not have links to earlier versions of 8.2 documentation which has been revised since release.

Index

The main page for the index for the Allegro CL documentation is index.htm. Every documentation HTML page has a link to the index on the Navigation Bar at the top and bottom. index.htm points to index pages for each letter (some letters are combined). There are pages with Common Graphics functionality and pages without Common Graphics functionality.

Permuted Index

The main page for the permuted-index for the Allegro CL documentation is permuted-index.htm. Every documentation HTML page has a link to the permuted index on the Navigation Bar at the top and bottom. permuted-index.htm points to index pages for each letter (some letters are combined).

The permuted index is generated from the link text of the index pages. Every word in such link text is indexed. For example, the link to the function build-lisp-image appears under B (for build), L (for lisp) and I (for image). This makes the permuted index a very useful tool for finding information on any topic where you know keywords but do not know which specifically appears in the index or the first letter of the names of the relevant symbols.

The permuted index has entries for each section heading of the essay documentation (those in the same directory as this file). Since they are indexed by each word in the heading, finding a section of interest using a keyword in the heading is relatively easy with the permuted index. (The headings are not in the index because they mostly start with "a" or "about" or "the" which are not words actually associated with the topic covered.)

Table of Contents

The table of contents of most of the essay documents is in contents.htm. Every documentation HTML page has a link to contents.htm (labeled ToC) on the Navigation Bars at the top and bottom. The following documents are not included in contents.htm: aserve/aserve.html, debugger-api.htm, phtml.htm, pxml.htm, using-webactions.html, and webactions.html.



1.0 Documentation introduction

The documentation for Allegro CL 8.2 is online. PDF versions of some of the HTML files are available upon request.

The online documentation is arranged into an overview section and a reference section.

Installation information can be found in installation.htm.

The release notes for 8.2 can be found in release-notes.htm.

The User Guide for the Emacs-Lisp interface is in eli.htm.

Every documentation page has a navigation bar at the top and bottom with links to the table of contents, contents.htm; the documentation overview (this file); cgide.htm, which contains, in its first section, the list of Common Graphics and IDE documentation; the Release Notes, release-notes.htm; and the index, index.htm. When the file referred to is open, the link is disabled and the background color is yellow instead of aqua (you may see different colors, of course).


1.1 Common Graphics and Integrated Development Environment Documentation

The documentation for Common Graphics and the Integrated Development Environment is integrated with the general Allegro CL documentation. Start with cgide.htm. The section About Common Graphics and IDE documentation in that document provides a map of CG and IDE documentation.


1.2 ANSI Common Lisp and MetaObject Protocol Documentation

The ANSI specification is reproduced in ANSI Common Lisp (the link is to the initial page). See also Allegro CL and the ANSI CL standard and Compliance with the ANSI specification in implementation.htm.

Documentation for the MetaObject Protocol (MOP) is in mop/contents.html (the link is to the initial page). The files in the mop/ subdirectory are an HTML version of the description of the MetaObject Protocol in chapters 5 and 6 of The Art of MetaObject Protocol by G. Koczales, J. des Rivieres, and D. Brobrow. The HTML version was prepared by Howard Stearns and copyrighted by the Elwood Corporation, as described in mop/admin.html.


1.3 Some notation

Allegro directory Used two ways: (1) the directory in which Allegro CL is installed, and (2) the translation of the sys: logical host, which is the directory where files needed while Allegro CL is running are located. We use the same term for both because these are normally the same directory. (sys: in fact translates to the directory containing the Allegro CL executable, usually mlisp or mlisp.exe, usually located in the directory into which Allegro CL was installed.)
Allegro executable or executable The file which is invoked to run Allegro CL. This is a small file and is not usually created by users (but see main.htm). The executable can be copied and/or renamed as desired, however. Starting with Allegro CL 6.0, there are a number of executables provided, each with an associated image file: mlisp (modern, case-sensitive lower, supports international character sets), mlisp8 (modern, case-sensitive lower, does not support international character sets), alisp (ansi, case-insensitive upper, supports international character sets), alisp8 (ansi, case-insensitive upper, does not support international character sets). On Windows, the executables have type .exe.
Allegro image file or image This file contains the bulk of Lisp data. It is typically large and has the extension dxl. The executable can only be run with an image file. Image files can be created by users (with, e.g., build-lisp-image and dumplisp).


2.0 The Overview section

Html files in the doc subdirectory of the Allegro directory (the directory where Allegro CL and related products were installed) describe the various features of Allegro CL. There are links where necessary between these files and relevant files in the reference section.

PDF versions of these files will be available in the doc/ subdirectory of the CD.


2.1 Allegro CL documentation table of contents

The document contents.htm is an outline of the Allegro CL documentation in table of contents format. The outline is too large to reasonably be included in this document.


2.2 Allegro CL documentation: list of overview HTML documents

Here is a list of the HTML (and several PDF) files that make up the base Allegro CL documentation.

To view the PDF files (such as clim-ug.pdf), you must have an Adobe Acrobat (r) Reader. This is available free from Adobe. Go to this location for further information: www.adobe.com/products/acrobat/readstep.html.

AllegroCache AllegroCache is a high-performance, dynamic object caching database system. The link is to the description page on the Franz Inc. website. Because the product is developing, documentation quickly goes out of date. The page linked to has links to all current documentation (scroll down to the bottom). The documentation is not included in the contents.htm nor in index.htm.
AllegroGraph AllegroGraph is a modern persistent, disk-based graph database with support for high-performance RDF triple-stores. The link is to the description page on the Franz Inc. website. Because the product is developing, documentation quickly goes out of date. The page linked to has links to all current documentation (scroll down to the bottom). The documentation is not included in the contents.htm nor in index.htm.
aodbc.htm This file describes version 2 of Allegro ODBC.
aserve/aserve.html AllegroServe is a Web Server facility. See also aserve/tutorial.html and aserve/htmlgen.html. These documents are not listed in contents.htm nor in index.htm.
basic-lisp-techniques.pdf This document (in pdf format) is an introduction to Lisp and Lisp programming written by David Cooper.

To view the PDF files (such as this one), you must have an Adobe Acrobat (r) Reader. This is available free from Adobe. Go to this location for further information: www.adobe.com/products/acrobat/readstep.html.

building-images.htm This document describes the build-lisp-image functionality and describes how to make custom images (i.e. dxl files) configured for your purposes. The function build-lisp-image, described in this document, creates a new image from scratch, inheriting a few features but no functionality from the running image (the one in which build-lisp-image is called). Note that creating an image which contains the functionality of the running Lisp image is done with dumplisp (see dumplisp) while creating images for delivery is done with generate-application, described in delivery.htm.
case.htm As an extension to standard Common Lisp, Allegro CL permits case sensitivity. This document discusses the issues with case sensitivity.
cggtk-relnotes.html [Linux only] Information on the GTK version of Common Graphics and the Integrated Development Environment (IDE).
cgide.htm [Windows only] This is the introductory document to the Common Graphics and the Integrated Development Environment (IDE) documentation. It contains a description of the documentation and the IDE interface (with links), and some essays on aspects of Common Graphics and the Integrated Development Environment.
clim-ug.pdf This document is the CLIM User Guide, which was provided as a printed (hardcopy) document in earlier releases and, starting with release 6.0, is a PDF file. Assuming you have an Adobe Acrobat Reader, clicking on the link will display the CLIM User Guide in your browser. Note that the table of contents and the Index contain active links. Note that CLIM is an add-on product and you may not be licensed to use it.

To view the PDF files (such as this one), you must have an Adobe Acrobat (r) Reader. This is available free from Adobe. Go to this location for further information: www.adobe.com/products/acrobat/readstep.html.

compiler-explanations.htm The compiler has an :explain feature that causes it to explain the actions it takes (with regard to boxing and inlining, etc.) This document describes the explanations provided by the compiler. It also discusses inlining.
compiling.htm This document describes the compiler. It provides information on how code generated by the compiler is controlled by the safety, space, speed, and debug optimization qualities. Information is also provided on declarations that will speed up code and tools for determining the effectiveness of declarations.
composer.htm This document describes the Allegro Composer utility (available on UNIX platforms only). Allegro Composer provides windowized tools for development.
cross-reference.htm This document describes the cross reference facility in Allegro CL. This facility can analyze Lisp code and determine what functions call what other functions and what functions are called by other functions.
date-time.htm This document describes support for ISO 8601 date/time representation in Allegro CL. This support was added by an update in early August, 2006.
dde.htm This document describes support for DDE (Dynamic Data Exchange), a Windows-only facility that allows Windows applications to exchange data.
debugger-api.htm This document provides information about internals of the Allegro CL debugger to assist application writers who wish to provide customized debugging facilities in their applications. Note that this document does not contain information needed for ordinary use of Allegro CL. This document is not listed in contents.htm.
debugging.htm This document describes the debugger in Allegro CL. The commands that provide debugging information and features of the debugger are discussed.
defsystem.htm Defsystem is a facility for managing files associated with an application. (It allows specifying the order in which files should be processed and the dependence of one file on another etc.) This document describes the defsystem facility in Allegro CL.
delivery.htm This document describes how to deliver an application written in Allegro CL. There is also a description of how to establish a patch system for your application which complements the patch system for Allegro CL, and other delivery-related issues.
dll.htm This document points to and describes examples showing how to create Lisp-based DLL on Windows. A Lisp-based DLL can be used by developers writing C, C++, and Java applications. (unix-shared-library.htm is a similar document describing creating Lisp-based shared libraries on UNIX platforms.)
dns.htm This document describes Allegro CL support for Domain Naming Systems.
dom.htm This document describes Document Object Module (DOM) support in Allegro CL.
dumplisp.htm dumplisp creates a new Lisp image file. However, the file created by dumplisp contains most of the functionality present in the currently running images, so all defined functionality will still be defined, and the current values of variables will be retained -- for the most part, see the document for details. (Contrast this with build-lisp-image which produces a fresh image which inherits very little from the running Lisp image.) This document describes dumplisp functionality and discusses issues of importance when using dumplisp.
ec2.htm This document describes the Allegro CL interface to the Amazon Elastic Compute Cloud (EC2).
eli.htm This document describes the Emacs-Lisp interface provided with Allegro CL. See also Running Lisp as a subprocess of Emacs for information on connecting Emacs to Allegro CL.
environments.htm This document describes the environments functionality. Based on the environments proposal described in section 8.5 of Common Lisp: the Language 2nd ed. (but not included in the standard eventually adopted), the environments functionality allows programmers to better describe the environments to the compiler.
errors.htm Some common errors which may be encountered while using Allegro CL are discussed, along with, where possible, suggestions for fixing them. The condition system type hierarchy in Allegro CL is also discussed.
examples.htm This document has some general information on Allegro CL examples, provides some links to sources of examples, and lists and (briefly) discusses the examples in the examples/ subdirectory of the Allegro directory.
flavors.htm Flavors is an object-oriented system for use in Lisp. It predates and has been effectively replaced by CLOS. We maintain flavors for backward-compatibility only. The Allegro CL flavors implementation is described in this document. Note that the reference portion (definitions of functions, macros, variables, etc.) is included with the text of this document. (Most functionality is described in the reference section of the documentation rather than being integrated into these html documents.) This document is unchanged in this release.
foreign-functions.htm The foreign function interface allows compiled foreign code to be loaded into a Lisp image and run from Lisp. (Foreign means C, C++, and Fortran, along with other C compatible object files.) Because of differing internal representations of data, it is not entirely straightforward to pass data from Lisp to C, to call foreign functions from Lisp, and to call back to Lisp from a foreign function. This document describes the tools provided for defining and calling foreign code.
ftp.htm This document describes the Allegro FTP Client module. It can be used to communicate with an FTP server.
ftype.htm This document describes how foreign types (e.g. C longs and shorts, C strings, C structures, etc.) can be defined in Lisp and how Lisp can access and operate on instances of foreign types.
fwrappers-and-advice.htm This document describes the fwrapper facility (and the older, deprecated advice facility). Both allow adding code that is run around functions (in some ways similar to around methods). This document describes how to use these facilities and has links to the relevant reference documentation.
gc.htm Lisp maintains a garbage collector which regularly frees up space in the Lisp heap which is no longer used. This process is called garbage collection. While garbage collection is fully automatic and so a user need not necessarily think about it, configuring the garbage collector to a specific application or to a pattern of Lisp use often results in significantly better performance.
gray-streams.htm This file provides details of the implementation of Gray streams in Allegro CL. Gray streams are the older stream implementation. Starting with release 6.0 simple-streams, which have advantages over Gray streams, is the primary stream implementation, but Gray streams are still supported. Simple-streams are described in streams.htm.
../gtk/readme.txt GTK is a graphics toolkit for X windows on various UNIX machines (and on Windows). Allegro CL 8.2 has separate interfaces to GTK+ 1.2 and GTK+ 2.0, available so far on Linux and Solaris machines. The referenced readme.txt has further information.
iacl.htm This document describes International character set support in Allegro CL. Allegro CL can support international character sets on all platforms. Note that non-international executables are also provided -- mlisp8 for example.
imap.htm This document describes the support for a client-server protocol for processing electronic mail boxes. It includes support for constructing MIME-compliant email messages.
implementation.htm This document provides specific information about the implementation of Allegro CL. Many details of the Common Lisp standard are implementation-dependent (such as the number of distinct floating-point types and their mapping to machine floats, the largest fixnum, the implementation of random, etc.) and this document says what Allegro CL does. Also discussed are extensions to Common Lisp functions (such as open, make-array, and others where an Allegro-specific enhancement is provided).
index.htm This document provides links to other documents, including links to all Allegro CL functions, variables, etc.
inspector.htm This document describes the non-windowized inspector. (Users on Windows with the Integrated Development Environment get all the functionality described in this document in inspector windows.)
installation.htm This document describes how to install Allegro CL and related products.
introduction.htm The document you are now reading.
jlinker.htm This document describes a Java/Lisp interface available with Allegro CL.
jil.htm This document describes a Java in Lisp facility in Allegro CL. Java in Lisp (jil) is a language for writing programs to run on the Java Virtual Machine (jvm). It uses a syntax familiar to Lisp programmers.
loading.htm This document describes details of the implementation of cl:load (such as where is a file with no path information looked for). cl:require is also discussed.
main.htm Allegro CL allows you to define your own C main(), as described in this document.
miscellaneous.htm This document describes functionality too limited to need a separate document.
mop/contents.html The files in the mop/ subdirectory are an HTML version of the description of the MetaObject Protocol in chapters 5 and 6 of The Art of MetaObject Protocol by G. Koczales, J. des Rivieres, and D. Brobrow. The HTML version was prepared by Howard Stearns and copyrighted by the Elwood Corporation, as described in mop/admin.html.

We thank Mr. Stearns and the Elwood Corporation for their kind permission in allowing Franz Inc. to use these files in our product. Much useful information about Lisp, including these files, can be found on the Association of Lisp Users (ALU) home page, maintained by the Elwood Corporation, at http://www.elwoodcorp.com/alu/.

multiprocessing.htm Allegro CL supports multiprocessing using lightweight processes (within the running Lisp process) on UNIX and multiprocessing using OS threads on Windows. The functionality is described in this document.
mysql.htm This document describes the facility that allows Lisp to connect directly to MySQL. MySQL is a powerful, efficient, production ready open-source database.
ndbm.htm This document describes the NDBM facility (UNIX only). This is an elementary but on occasion useful database facility.
ole.htm A document describing interfacing to OLE. Allegro CL for Windows only. See also ole_reference.htm.
../opengl/readme.txt OpenGL is an open graphics library. An interface to OpenGL from Allegro CL was generated by SWIG. Layered upon this interface are a GTK and Common Graphics (Windows-only) veneer. The readme.txt file referenced has a brief introduction to the interface. More information is in these files: on the Common Graphics veneer: ../opengl/cggl/doc.txt (Windows only). More information is in these files: on the GTK veneer: ../opengl/gtkgl/doc.txt. (We also have an interface to GTK, mentioned above -- see ../gtk/readme.txt. The GTK veneer on OpenGL provides OpenGL additions in GTK style.)
oracle-interface.htm This document describes the Allegro Oracle Direct Connect interface to Oracle databases.
orblink Allegro CL includes an Orblink implementation. It is documented in its own directory. Start with readme.htm in the orblink directory.
os-interface.htm This document describes how to run OS functionality from within Lisp and also how to find out the current directory, how to change the current directory, and other aspects of interfacing with the operating system.
packages.htm This document provides details of the implementation of packages in Allegro CL and includes a description of package locking (which prevents accidental redefinition of Common Lisp and Allegro CL functionality).
pathnames.htm This document provides information on the implementation of pathnames (including logical pathnames) in Allegro CL.
plugin.htm [removed document] This document in earlier releases described example code for implementing a Common Graphics application as a plugin for HTML browser programs such as Internet Explorer and Netscape Navigator. The example has been removed. We have encountered difficulty in making this functionality robust, and have decided not to attempt to support it in the current release.
prolog.html This document describes the implementation of Allegro Prolog in Allegro CL. The documentation is preliminary. It assumes prior knowledge of the Prolog language.
phtml.htm and pxml.htm These files (which are quite preliminary) describe the Lisp-based HTML and XML parsers. Updates to these files will be provided over time. These documents are not listed in contents.htm.
regexp.htm This document describes the regular expression APIs available in Allegro CL. There is an older and a newer interface and both are described in ths document.
release-notes.htm This document is the release notes for Allegro CL on all platforms. Please refer to this document if you see unexpected behavior.
rpc.htm This document describes the Remote Procedure Call (rpc) utility.
runtime.htm Runtime is the technical solution to the restriction of runtime licenses. It has both legal and programming meanings. The legal meaning (determining, e.g., to whom a runtime image can be distributed and at what royalty) is defined in the Allegro CL Runtime License Agreement. In this document, the programming meaning is discussed. Information is provided on how to create runtime images (but also see delivery.htm and building-images.htm), what are the limitations of a runtime image, and so on.
runtime-analyzer.htm The runtime analyzer is a tool for determining the time and space usage of code. With this tool, programs can be made more efficient and bottlenecks can be identified. This document describes the runtime analysis tools, which are statistical samplers of time and space usage and a function call counting profiler. Note that not all versions of Allegro CL include the runtime analyzer. (In earlier releases, this tool was called the profiler.)
sax.htm The sax module provides a validating parser for XML 1.0 and XML 1.1. The interface to the parser based on the SAX (Simple API for XML) specification. Users provide methods for the various generic functions that implement the parser.
shell-module.htm The shell module is intended to provide UNIX shell-like commands, such as you find on a modern UNIX system, and in addition shortcuts for some common Perl idioms.
smp.htm This document describes the changed functionality for managing multiple processes in a Symmetric Multiprocessing (SMP) Lisp. SMP will be introduced in release 9.0 but the API is available now so code can be changed as necessary to work with SMP. (Allegro CL 8.1 users must load the patch released in July, 2009.)
socket.htm Sockets are a way for different running programs to communicate with each other. This document describes the support for sockets within Allegro CL.
soap.htm This document describes the Allegro CL/SOAP API.
source-file-recording.htm Allegro CL provides a facility for remembering the file in which a Lisp function (or variable, parameter, macro, etc.) is defined. That facility is described in this document.
startup.htm This document describes starting Allegro CL. Various methods of starting (from a shell, as a subprocess of emacs, on Windows with or without the Integrated Development Environment, etc.) are discussed. Command-line arguments and initializations files (both how to use them and how to suppress them) are described along with other things you should know about startup. Startup problems and suggested solutions are also discussed.
streams.htm This file provides details of the implementation of simple-streams in Allegro CL. Simple-streams are the standard stream type. Earlier releases of Allegro CL used Gray streams, which are still supported. See gray-streams.htm.
string-utilities.htm This file describes the util-string module which contains string manipulation functionality.
test-harness.htm This document describes the test harness facility. A test harness is a collection of macros and variables associated with testing programs and applications, along with templates for test forms.
top-level.htm The top level is the interface to a running development Lisp image. (We say `development' to distinguish from a Lisp application. Most applications provide their own top level.) This document provides information about the Allegro CL top level.
unix-shared-library.htm This document points to and describes examples showing how to create Lisp-based shared libraries on UNIX platforms. A Lisp-based shared library can be used by developers writing C, C++, and Java applications. (dll.htm is a similar document describing creating a Lisp-based Windows DLL.)
uri.htm This document describes the URI facility. URIs are a superset in functionality and syntax to URLs (Universal Resource Locators) and URNs (Universal Resource Names). Allegro CL provides support for manipulating URIs.
version-81-release-notes.htm This document is the release notes supplied with release 8.1. Most of the information it contains is not repeated in release-notes.htm. Note that some of the information does not apply to release 8.2.
webactions.html This is the user guide and reference manual for the Allegro Webactions facility for generating dynamic web pages. See also using-webactions.html, which is a general introduction. Webactions works with AllegroServe (see aserve/aserve.html).
xml-rpc.htm This document describes the Allegro CL implementation of XML-RPC, which implements classes and functions to support the XML-RPC protocol for remote function calls through HTTP connections.


3.0 The Reference section

For Allegro CL-specific functionality, virtually every operator (function, generic function, or macro), every constant and variable, and many classes defined in Allegro CL, other than standard Common Lisp functionality, are described in individual HTML files called description pages. These files are arranged as follows:

[Allegro directory]/doc/[kind]/[package]/[symbol].htm

Where:

[Allegro directory] is the directory into which Allegro CL was installed. The document you are reading is [Allegro directory]/doc/introduction.htm.

[kind] is one of

[package] is the home package of the symbol being documented, and is one of

common-graphics, compiler, composer, dbi, defsys, excl, ff, javatools.jil, javatools.jlinker, mp, net.post-office, net.rpc, net.uri, prof, socket, system, top-level, util.test, xref

Note that some packages have no entries under certain kinds.

[symbol] is the symbol naming the object (or the name of the top-level command). A * character in a symbol name is handled specially. * appears as s_ or _s depending on whether the * is leading or trailing.

Thus, the documentation for the variable excl:*enable-package-locked-errors* is in the file:

[Allegro directory]/doc/variables/excl/s_enable-package-locked-errors_s.htm

And the documentation for the function system:command-line-arguments is in the file

[Allegro directory]/doc/operators/system/command-line-arguments.htm

Note: Common-graphics operators are further organized by the first letter of the symbol naming them. This prevents a directory with over 1600 files.

Each page names the symbol, its home package, and the type of the object being described (function, macro, variable, class, etc.)

Descriptions of operators include the argument list. Generally the argument list is the same as returned by functions like arglist but not always. It will not be when (1) the stored argument list is abbreviated (e.g. &rest args or &key &allow-other-keys, where argument processing is done within the operator body) and thus unhelpful; or (2) the stored argument names are unhelpful (struct -- because the object is a struct -- rather than, say, process or pathname).

Some arguments are listed but described as not for programmer use (these arguments may be intended for later enhancements or may support internal actions only). A few pages describe internal functionality not intended for programmer use. Symbols naming such functionality are exported for unavoidable system reasons and because they are exported, they have description pages.



4.0 Assistance available on the internet and the World Wide Web

Franz Inc. maintains a World Wide Web home page (http://franz.com/). Along with much else, the latest update of the Allegro CL documentation, the latest Allegro CL FAQ, and the latest Allegro CL patches can be found in the support section.


4.1 The Allegro CL FAQ

FAQ stands for Frequently Asked Questions. The Allegro CL FAQ is a document written in question and answer format containing answers to questions often asked by users of Allegro CL and related products. Franz Inc. updates the FAQ regularly.

The FAQ is available on the Franz Inc. WWW home page (in the Support section):

http://franz.com/support/faq/


4.2 Patches

A patch is a file (typically a fasl -- compiled Lisp -- file) which either corrects some error in the product or provides some enhancement or new feature. Patches are available from the Franz Inc. web site. (Some patches, particularly those which implement an improvement, an enhancement, or a new feature rather than a bug fix, are restricted to supported customers only.) Patches are stored in both locations with a directory structure that mirrors the distribution directory structure, so that patch files can be downloaded into the correct directories of the distribution. There are several ways to get patches:

  1. The function update-allegro downloads patch files and places them in the correct locations.
  2. The update program (update.exe on Windows, update.sh in UNIX) will get patches if called with the -u option.
  3. In the IDE, the Download Patches dialog will cause patches to be downloaded when the Download button is clicked.

There are various kinds of patch files.

On the web site, http://franz.com/, choose Support, then click on the link to patches and follow the instructions.


4.3 Further patch information

Note the following points.


4.4 Should you get all patches?

Whether or not you should get all available patches depends on your current tolerance for instability. Because patches are less well tested than releases, patches may occasionally introduce errors as well as fix problems.

However, even a correct patch may introduce instability: if a patch enables a feature which was previously ignored or signals an error (correctly) where none was previously signaled, your code may fail because the patch uncovered a problem which was previously unnoticed. Suppose, for example, a patch causes certain declarations to be used during compilation (without the patch they are ignored). Such a patch would not fix a bug (since ignoring declarations is permitted) but if your code happened to contain incorrect declarations, then the patch would be destabilizing. (Without the patch, the wrong declarations were ignored and so did not harm. With the patch, they are used.)

The potential impact of a patch is given in the LOG file in the patch directory. Here are two entries from the 5.0 patch LOG (the 8.2 patch LOG file will be organized similarly):

   Mon Sep 14 11:27:52 PDT 1998
   Patch: update/p0a001.001
   Fixes a bug where find-restarts, when given the optional condition 
   argument, would not consider restarts that are not associated with 
   any condition.
   Impact: Should be minor

   Tue Sep 1 14:33:29 PDT 1998
   Patch: update/p0b002.001
   Fixes self tail recursive call with intermixed args. 
   Problem resulted in errors in compiled code, 
   not in interpreted.
   Impact: Recommended.

Notice the Impact line (made bold for emphasis). It provides an assessment of how destabilizing a patch may be. Note that in these cases, one is minor and the other patch (which fixes a problem where compiled code ran incorrectly) is recommended.

If you are in a development cycle, our advice is to get all available patches for a platform (machine type) and Allegro CL version. Patches for associated products (such as CLIM) should be included as well.

But if you are preparing a delivery, we advise you to be selective, perhaps getting only the patches that deal with problems you report.

Note that we have previously advised even users who are developing applications rather than preparing for delivery to only include patches when they experienced the problem fixed by the patch. There are pluses and minuses to each recommendation. While including all patches gives you all available fixes, as we said above, patches are not as well tested as releases and sometimes a patch introduces a new problem or bug. However, we have changed our advice for when you are developing because many patches are for performance, and therefore generally useful, and because problems introduced by patches, while they do happen, are uncommon and are usually fixed quite quickly (typically with an updated patch), and because it is relatively easy to back out a patch if it causes problems.

Note that the report created by dribble-bug lists all patches included in the image. It is very important that this information be included with a bug report.


4.5 What to do with patches when you have downloaded them

update-allegro downloads patches but does not create new images. To create new images, exit Lisp (if you are running it) and run update.sh on UNIX machines and update.exe on Windows machines. These scripts will update all Allegro-supplied image (dxl) files by starting Lisp with the dxl file and calling build-lisp-image. They also make backups of the the dxl files. You must recreate any image files you created yourself.

The usage for update.sh is

update.sh [-u] [--proxy proxy] [--proxy-auth auth] 

Without any arguments, rebuild images to contain all downloaded patches. With the -u argument, download new updates before rebuilding images. --proxy allows specification of a proxy host and port. It is typically something like "cobweb:3128". --proxy-auth allows specification of proxy basic authentication. It is typically your password for the proxy. You may specify --proxy without --proxy-auth.

--skip-ide causes the updating process to skip rebuilding the allegro images (which are the images with the IDE that start the IDE when started). The IDE is only available on Linux and the Mac (and Windows).

See sys:update-allegro.

update.exe is on the submenu of the Allegro CL menu item on the Start menu on Windows. The typical way to run it is to choose that menu item (actually, there are two items, one downloads patches and updates, the other just updates). But it can also be run in a Command Prompt window. The usage for update.exe (on Windows) is

update.exe [-u] [-h hostname] [-p proxy-host] [-P proxy-auth] [-f]

-u means update before rebuilding. -h -- the value of the hostname passed to sys:update-allegro (for updating). -p and -P are the proxy host and proxy authority passed to sys:update-allegro. -f -- forces rebuild even when no new patches (only needed when -u is specified).

Note of specifying heap starts and sizes. You may wish to specify the starting positions and initial sizes of the Allegro CL Lisp heap and the aclmalloc heap. You may also want to specify the initial sizes of newspace and oldspace. These are set when using build-lisp-image to build an image with the :lisp-heap-start, :lisp-heap-size, :aclmalloc-heap-start, :aclmalloc-heap-size, :newspace, and :oldpsace keyword arguments. If you want starts and sizes other than the defaults in the images built by update.exe/update.sh, you can set the various environment variables listed in Arguments to build-lisp-image 3: defaults taken from environment variables. If any of those variables are set when updating images, the image will be built as if the corresponding argument was set to the variable value.

Note on backups of dxl files: the first time update.sh/bat is run, the dxl files are copied to files with `orig' added -- mlisp.dxl to mlisporig.dxl, e.g. The second time, they are copied with `old' added -- mlisp.dxl to mlispold.dxl, e.g. On subsequent runs, the backup may not be done correctly. Please move *old.dxl to *oldn.dxl (for some n -- for example, mlispold.dxl to mlispold1.dxl) before updating to ensure that the backups are done correctly.

Backing out of patches: you may occasionally discover that a patched image does not work properly. (Perhaps the patch was faulty, or perhaps the fix, whatever it is, interacts incorrectly with your application.) To back out of patches, (1) rename the new dxl files, (2) copy the original dxl files (they will have "old" or "orig" appended to their filenames) to their original names, and (3) move any new fasl files out of the code/ subdirectory. You are now back to where you were before running update.sh or update.bat.


4.6 Updating the bundle file

The bundle file contains a collection of fasl files associated with Allegro CL modules. When a module is autoloaded or loaded by a call to require, it is typically loaded from the bundle file. (If you see the message "Fast loading from bundle...", the file is being loaded from the bundle file.) The location and name of the bundle file are returned by the function bundle-pathname.

Sometimes module fasl files have to be updated. In that case, a new file is downloaded from the Franz Inc. patch repository and is placed in the code/ subdirectory of the Allegro directory. The system always checks the code directory first for a module fasl file before looking in the bundle file. That assures that the latest version of a module fasl file is loaded.

However, it is often useful to update the bundle file to include all the updated module fasl files. In Allegro CL , this update is performed automatically (when update.sh or update.bat is run).



5.0 Reporting bugs

Before reporting a bug, please study this document and the ANSI CL Standard document.

A report that such and such happened is generally of limited value in determining the cause of a problem. It is very important for us to know what happened before the error occurred: what you typed in, what Allegro CL typed out. A verbatim log may be needed. If you are able to localize the bug and reliably duplicate it with a minimal amount of code, it will greatly expedite repairs.

It is much easier to find a bug that is generated when a single isolated function is applied than a bug that is generated somewhere when an enormous application is loaded. Although we are intimately familiar with Allegro CL, you are familiar with your application and the context in which the bug was observed. Context is also important in determining whether the bug is really in Allegro CL or in something that it depends on, such as the operating system.

To this end, we request that your reports to us of bugs or of suspected bugs include the following information. If any of the information is missing, it is likely to delay or complicate our response.

Use dribble-bug as follows. Entering

(excl:dribble-bug filename)

causes implementation and version information to be written to the file specified by filename, and then records the Lisp session in the same file. Exiting Lisp or entering

(dribble)

will close the file after the bug has been exhibited. The following dialog provides a rudimentary template for the kernel of a bug report.

USER(5) (dribble-bug "dribout")
USER(6) ;; Now duplicate your bug . . .
USER(7) (dribble)

It may be that the bug causes failure which prevents getting a dribble transcript showing the bug. We still need the dribble-bug output showing the platform, patches, etc. Get this with

USER(5) (dribble-bug "dribout")
USER(6) (dribble)

print-system-state prints the information that goes in a dribble-bug file. You can use that function to get the information if you wish. In either case, send the contents of the file dribout or the output of print-system-state.

Send bug reports to either the electronic mail or postal address given in Section 5.1 Where to report bugs and send questions. We will investigate the report and inform you of its resolution in a timely manner.

As we said before, the dribble-bug log does not capture things printed by the operating system or by operating system utilities. These messages may be important. Please be sure you include them in the message.


5.1 Where to report bugs and send questions

Send problem reports and technical questions of any type by email to support@franz.com. Our mailing address is Franz Inc., Suite 715, 2201 Broadway, Oakland CA 94612 USA; and our telephone number (in the USA) is +510-452-2000 and our FAX number is +510-452-0182. (Note: our address and phone numbers are new as of August 1, 2002.)


5.2 Core files: when they are useful and what to do with them

Certain kinds of Allegro CL errors/problems cause failure of the Lisp and can result in the dumping of a core file. Sometimes this occurs when unexpected exceptions from the operating system make continued operation impossible. Sometimes it is due to a GC orm stack error. (GC errors are discussed in gc errors in gc.htm.) Often you are asked whether you want a core file with a question like:

  Would you like to dump core for debugging before exiting(y or n)?

If you answer y, then an attempt will be made to produce what is known as a "core file". Core files are usually produced on Unix and Unix-like systems, they have many different shapes and levels of usefulness. In order to make the best use of time spent and space used in preserving and communicating core dumps to Franz, here are some guidelines to follow when a core is produced:

  1. If possible, find another way: core files are sometimes large, sometimes incomplete, and often it is hard to glean enough information from a core to figure out what went wrong. A better strategy is to either find a reproducible test case which we can replicate in our offices, or else allow us ftp/vpn access to your machine to reproduce the failure.
  2. Send it all: the core file is never complete; it always relies on the original lisp executable (usually called mlisp, mlisp8, alisp, or alisp8, or renamed as your application) and on the "acldll" (which is the Allegro CL shared-library, having either .dll, .so, .sl, or .dylib extensions). It may also rely on a .pll file, which can be found out in a running image by noting the value returned by (excl:pll-file) - a null return means that there is no pll file, and a pathname is the location and name of the .pll file - that should also be sent. Note: Even if you believe that we already have the executable file or the shared-library, or even the .pll, include all of it into the directory that you will send us.
  3. Don't use email: a usable core and its entourage are much too large to send through email; instead, package it up into an ftp file and upload it to ftp://ftp.franz.com/incoming/ (Those files are not readable by those outside of Franz, so there is no need to worry about privacy issues.) Then, send email to us telling us that the files have been uploaded to incoming, and we can then grab it and try it out.


6.0 Contacting Franz Inc. for sales, licensing assistance, and information

Sales and licensing questions should be directed to your account manager. If you are not already a customer (and thus do not yet have an account manager), send email to info@franz.com, or call Franz Inc. (in Oakland, California, USA) at +1 510-452-2000, or send regular mail to Franz Inc., Suite 1450, 555 12th St., Oakland, CA 94607 USA. Please give your email address, phone number, and mailing address. The appropriate Account Manager will contact you.

If you are already a customer, you should have the name and email address of your account manager, but if they are not to hand, use the general ones given just above.

General product information is available on the Franz Inc. web site, http://franz.com/. You can get additional information by contacting us. Again, send email to info@franz.com or call +1 510-452-2000 or write to Franz Inc., Suite 1450, 555 12th St., Oakland, CA 94607 USA.


Copyright (c) 1998-2012, Franz Inc. Oakland, CA., USA. All rights reserved.
This page has had moderate revisions compared to the 8.1 page.
Created 2010.1.21.

ToCDocOverviewCGDocRelNotesFAQIndexPermutedIndex
Allegro CL version 8.2
Moderately revised from 8.1.
8.1 version